my yzf 750 strugles and has no power when pulling away. you have to get revs up and ride the clutch to get it moving.. what could this be? check all vacuum lines you could have a manifold leak...buy ...
i ordered a camchain for my YZF750r and the shop got me a camchain for a YZF750sp will it fit I believe both machines share most of the same internals however check the part Nos for both machines if ...
Question about 1995 YZF 750 R
one of the overflow tubes on the right side of my bike came off. what are the three overflow tubes on the right side of my 1995 yamaha yzf 600 connected to? One came loose and I can't reconnect it. I ...
...hydraulic hose where it puts pressure on the clutch push rod to disengage the clutch.You will need the two washers and a union bolt to reattach the hydraulic hose to the case. Then you will need to ...
bike wont start engine turing over but wont start can smell petrol so its getting fuel i got it serviced and was told plugs were ok and he sorted this non starting last time by disconecting side stand
My 94 Yamaha YZF 750 carburetor has 4 breather hose inlets (so I believe) that had no hoses on them when I bought it. Just curious if I can just attach some bulk hose to them with a breather filter on
Usually answered in minutes!
19 Questions
29 Questions
23 Questions
18 Questions