Questions & Answers for: hazard switch replacement pontiac grand

...Hazard switch. You have to replace the entire switch it's either going to be wiring or the blinker connections in the steering column call a pontiac dealer and ask if there was a recall on the car ...

...hazard switch my 2004 pontiac grand am is making a constant clicking sound from the hazard switch. i replaced it and it still makes the sound. any ideas? Have you checked the flasher relay. It may ...

turned off hazard flashers, now I have no signal lights on 2003 grand prix Replace the hazard switch that it's self is also the flasher for the turn signal's, bad thing is that is a dealer item only.

HAZARD SWITCH. IT DOESNT HAVE A FLASHER. THE FLASHER IS INTEGRATED IN THE HAZARD SWITCH. ITS ABOUT 20 BUCKS FROM THE DEALER. THE TURN SIGNAL SWITCH HAS TO BE REPLACED AS AN ASSEMBLY. THE COLUMN COVERS

...the turn signal relay is part of the hazard light switch assy. you will need to replace the intire hazard switch assy. check with your pontiac dealer some of these switches were recalled......GOOD ...

...hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch. COULD BE COMBINATION TURN SIGNAL OR HAZARD ...

hazard switch on 2000 grand am still clicking after replacing it how can I bypass this have replaced the hazard switch and it still clicks can I connect a couple of wires off of the back and get it to

How do I replace the hazard relay switch on a 2003 Pontiac Grand Am GT? There was a recall on these a number of years back, check and see if they will still replace it at any gm dealer.

...hazard switch on and off a few times see if that changes the problem because your tsignals run through the hazard switch , if that changes what happens then replace hazard switch, next would be turn ...

...problem. What think? 2000 Pontiac Grand Prix GTP This vintage era GM vehicle is known for turn signal issues due to bad hazard switches. Replace the hazard switch and everything should return to ...