Questions & Answers for: happens plates meet

2004 Sienna under engine noise vibrating plate-like sound coming from under the engine which seems only to happen when car is idling. I took it to the dealer. They apparently removed a heat sheild ...

i have a 2010 kx250f that has done 40hr and have g... i have a 2010 kx250f that has done 40hr and have gone through 4 clutches. i start off with plenty of free play but end up with none. i used to ...

for some odd reason, even though it is snapped into place, the metal cover on my designer 1, (near the feed dog) slowly moves and next thing i know, i have a broken needle!!! what is making this ...

...meets the transmission, Can anyone help? Sorry Lenny but if u have a duel-mass flywheel, what happens is the rubber mounts wear out and shake like mad u can still drive it but wont last for

Troy-Bilt w/Tecumseh HMSK 80-110 engine. Where can I get a repair manual covering the carburetor OR a picture showing carb linkages? Runs great but for some reason the throttle will not adjust the ...

How can I adjust the throttle on my Toro Snow thrower? My snow thrower runs at either full speed or not at all. I can adjust the throttle from full speed to half way to the turtle before it shuts off ...

...plates all around the most inner and on the outer edge, so what happens is the friction plate`s surface dont meet up with the hub , the ridge left from wear is catching the plates and eating a ridge ...

...a broken wire where the tail gate meets the body, normally gets broken in the rubber casing, it happens on a lot of vehicles. Hope this helps ...

plates off thread is tangled on a silver bar going left to right can we fix this? You helped me fix a problem a couple of weeks ago thanks so much can we fix this? It happened a after my needle became

...plates meet up crust is weak volcano appear at these. Movements in the crusts can also cause pressure to build up . If hot lava contacts with water . Steam (correction super heated steam) is created ...