Questions & Answers for: how to hang drop ceiling

...the canopy there are three screws. remove these and the canopy will drop down. the fan will be hanging on a semi round ball in the mounting bracket. the circuit board should be accessible above ...

...ceiling if your fan is hanging by a rod then you can unscrew the 4 screws at the base of the fan and let the base drop to the fan and you should see the wires blue red or black and white there the ...

drop down and vibrate loose. If you do not have a wall switch for it, you may want to go to pull chains, or just replace the remote. It is NOT the controller you hold in your hand, but the part in the

...drop down bar of about 12 inches. 1. Is the 52-CL suitable for mounting on a slanted ceiling? 2. If it is, what accessories do I need to modify it for mounting? hello d, 1. yes, with the proper rod, ...

...hang) from the ceiling, not on the wall. Type of Ceiling in office is called a 'drop ceiling'...has the tiles Need instructions and list of items needed for installation. Hope you can help me. Thank ...

...put it back. Now you need to unhook the wiring. Drop the fan motor unit down. (There is a way to hang the unit while you unhook if you see it.) Then undo the screws for the base and remove. That's

...turn the canopy and drop it down... This link will help you they had the same problem as you... http://www.askmehelpdesk.com/electrical-lighting/hampton-bay-ceiling-fan-removal-25673.html ...

...to tighten it up? Hi .. no you should be able to just drop the canopy cover ,, and be able to see what is loose at the ceiling .. it may be the mounting plate where it connects tio the ceiling

...ceiling assembly to make sure there is no obstructions to duct work such as rubber roof material hanging down etc, that would block any flow to ducts. Do you have all, or most of your ducts open

...Ceiling fan quit working and i have a green wire hanging The green wire is a ground wire and the fan and light should function without it connected. You can attempt to reconnect that wire, turn off ...