20 Most Recent Maytag Neptune MDE5500AY Electric Dryer Questions & Answers

0helpful
2answers

Change rollers on a Maytag Neptune Dryer

You have to work from the front. Pull the top then the front then you will be able to see everything. Pretty self explanatory.
10/2/2019 2:46:30 PM • Maytag Neptune... • Answered on Oct 02, 2019
0helpful
1answer

I replaced my control board on my MDE5500AYW and

Main Control Board 33003028 Is this the part you replaced?
2/21/2018 12:47:02 AM • Maytag Neptune... • Answered on Feb 21, 2018
0helpful
1answer

MDE5500AYW Maytag Neptune not Heating

Sure I will help you when that happens that means that your heater core is no longer operating and when the heater core doesn't work when your dryer doesn't heat up anymore so that's your problem I hope I have helped you please leave a response or Stars if I have helped
2/7/2018 12:59:52 AM • Maytag Neptune... • Answered on Feb 07, 2018
0helpful
1answer

Commercial dryer model #MDE26CSACW won't start

near fan blower ,had a fuse white by pass than try if work change it than clean the vent
11/14/2017 2:44:21 PM • Maytag Neptune... • Answered on Nov 14, 2017
0helpful
1answer

How many sensors to test dryer door switch, one or two?

the female is the switch! you can pop the top off and check with electric tester on ohms, make sure you unplug the drye check the breaker make sure you have 220 volts a in the outlet !
8/16/2017 12:07:04 AM • Maytag Neptune... • Answered on Aug 16, 2017
0helpful
2answers

Magtag Neptune Dryer - when I press start it say

sounds like a bad control board it seems like you have a letter missing in your model number ...I looked up the part ouch ..http://www.repairclinic.com/vwo1/Maytag-Dryer-Model-MDE5500AYW-ID-563862-Circuit-Board-Timer-Parts?s=t-mde550ay-%3d%3dd563862b4a8c13
7/26/2017 6:33:33 PM • Maytag Neptune... • Answered on Jul 26, 2017
0helpful
1answer

Start button does not kick the dryer on

Looks like your drive motor is locked up. It has an internal overload switch which cuts power off when motor gets too hot...Replacement of the motor on a used dryer is probably not the best choice as it can be quite pricey..
7/10/2017 3:02:27 PM • Maytag Neptune... • Answered on Jul 10, 2017
0answers
0helpful
1answer

Gas dryer heat (drying) works intermitenly, model Maytag MDG6700

check the exhaust tube for obstructions
10/26/2016 1:24:23 AM • Maytag Neptune... • Answered on Oct 26, 2016
0helpful
1answer

Dryer chirping along with the following: start button flashing, dry temp on high light lit, 56 on timer timed dry lit and dry time selector lit was on sensor dry when we left and turned off

Disconnect power or turn breaker off for about 5 minutes. This may reset the unit. Otherwise you have an eror showing and need to retrieve the error code. Google your make and model followed by error codes a d you should get a link to retrieve the codes.
8/9/2016 2:31:36 PM • Maytag Neptune... • Answered on Aug 09, 2016
0helpful
1answer

My maytag dryer display is stuck on(8.8.)and wont do any thing I tried unplugging it

This may be from a key that is stuck on the panel. Press each key individually to see if all of them move up and down.
6/30/2016 12:08:29 AM • Maytag Neptune... • Answered on Jun 30, 2016
0helpful
1answer

What causes maytag neptune dryer has pf error? My dryer worked in air fluff but not sensor or timer mode. Now it will not work at all. the lights on the control panel just blink . What could be the ca

Pf shows a power failure hols the stop clear button and it should work again.As for your other problems I will more details such as a model number Gas or Electric dryer and example of the problem in detail
4/14/2016 1:41:49 AM • Maytag Neptune... • Answered on Apr 14, 2016
0helpful
1answer

My dryers control push pad is not working

Type Maytag Neptune push pad into YouTube and see if the video comes up, thanks!
4/14/2016 1:39:30 AM • Maytag Neptune... • Answered on Apr 14, 2016
0helpful
3answers

Maytag Neptune MDE9700AYW

We have the same machine. The drum also broke so we had it professionally installed. It wasn't done well enough and after the 90 day repair warranty, other problems developed. We still don't have a dryer and the next repair is $500 as other parts were damaged and we didn't catch it within the 90 days.
Bottom line: do have it professionally installed but be sure to ask about their work guarantee. As soon as you have any problem at all, call them back.
2/7/2016 3:56:10 AM • Maytag Neptune... • Answered on Feb 07, 2016
0helpful
1answer

Door switch shorted out now no power what blew

on board fuse or control card cooked
1/25/2016 2:54:17 AM • Maytag Neptune... • Answered on Jan 25, 2016
0helpful
1answer

How do I fix my maytag dryer

sounds like its hung in a loop unplug wait a few min. plug back in
12/24/2015 6:07:46 PM • Maytag Neptune... • Answered on Dec 24, 2015
Not finding what you are looking for?
Maytag Neptune MDE5500AY Electric Dryer Logo

2,008 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19166 Answers

David Shaub

Level 3 Expert

2994 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Maytag Dryers

  • Maytag Dryers

Most Popular Question

dryer chirping along following start

  • Dryers
Loading...