Questions & Answers for: gas dryer doesnt start power

Question about 73952 Gas Dryer

1 Answer

gas dryer no heat gas dryer tumbles but no heat after power outage either it opened up the ignitor glow coil with the surge or the control board or flame sensor is defective

Ad

Question about ATF6000ES Front Load Washer

1 Answer

...gas dryer, and refer you have to have a rectangular box wall mount surge protector. You cannot have a power strip surge protector on a cord as moisture can get into it and cause electrical fires. I ...

Ad

...gas and accelerates better if you gently ease the throttle down all the way through. doesnt happen wen its cold though. any thoughts? thanx Possible clogged fuel filter, faulty ignition system (ie. ...

Question about EED4300TQ Electric Dryer

1 Answer

...gas dryer. The most common problem with a gas and no heat is the ignitor going bad... Here is a tip that I wrote about that problem... Gas Dryer not Working Gas Dryer Not Heating ...

Question about EED4300TQ Electric Dryer

1 Answer

...gas dryer. Starts up but no heat. Ignitor doesnt glow therefore no flame. Checked with ohm meter , seems good . Also checked coils for gas valve,checked out good . When you start up there is no power ...

dryer not working after power surge. It starts but doesnt generate any heat, starts beeping and then stops. Was working fine until the power surge. Most likely, the surge blew the internal fuse. 

...dryer has no power, although plugged into electrical outlet. No power/no lights, after power surge/outage. Is there a reset button or fuse that needs to be checked/changed? Is there something else we ...

Question about Affinity 5.8 Cu. Ft. Gas Dryer

2 Answers

...Dryer wont turn on basically this thing wont run when i press the start switch. when i open the door i see the light come on besides that it doesnt start. i tried unplugged it and plugging it back in ...

Question about Epic MGD9700S 27 7.3 cuft. Gas Dryer Black

1 Answer

...Gas Dryer white Displayed PF, when try to start, trips breaker. Control board is scorched. What would cause the control board to be scorched? Did you have a lightning strike near by? Or power outage ...

Question about Epic MGD9700S 27 7.3 cuft. Gas Dryer Black

1 Answer

...gas power dryer will not turn on. before I try to get it fixed ( and spend hundreds to get someone here), I'd like to know, if these dryers can be fixed from a electrical power surge, or generally, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...