Questions & Answers for: fuel guage empty

guage starts to go to empty and the check fuel light comes on. I stop and restart the car and the gas guage reads correctly. What causes this and what can be done to fix the problem? You likely need a

Ad

Question about 2001 Silverado 1500

1 Answer

fuel guage 2001 chevrolet silverado 1500 fuel guage intermittently shows empty when i first fill up the tank , the guage goes from full to empty until the tank is approximately half full then it ...

Ad

...fuel guage works fine. But 7 gallons fills it up from empty. As I drive the guage travels from full to empty just like it should. I do not have any dents in my tank. I do not think you have any dents ...

fuel guage/fuel empty light errors on 1999 chrysler sebring. On my 1999 Chrys Sebring convertable, the fuel guage occasionally flucuates toward empty and the low fuel light comes on when there is ...

Question about 2000 Sebring

1 Answer

...guage and fuel light. What would cause this? A loose connection on the sending unit could cause the problem but also moisture in the tank in cold weather could also be a factor in which i would add ...

Fuel guage reading was erratic. Replaced fuel pump and sensor..fuel guage then read a constant 1/4 tank lower than it actually was. Mechanic checked and said it was wired wrong...fuel guage then read ...

Question about 2001 Rodeo

1 Answer

...fuel, guage shows empty. When tank is completely empty, the guage shows full. Guage is of digital type with the bars. What can I do ? Any tests I can do ? Where is the location of the sending unit ? ...

fuel guage stuck on empty on my 1989 camaro the tank is full, but the guage says empty, is there a fuse for the guage? sending unit in tank probably bad-check the wires to it-there may be a short- ...

Fuel guage sometimes read empty when there is gas in the tank? Even when there is gas in the tank,the low fuel comes on[guage drops to empty]and sometimes starts to read again.Guage model MR497413;...

fuel guage,faulty connection somewhere, or a dicky guage are some of the causes According to my info, If pcm detects a problem with sending unit or circuit, the guage will default to empty. If the ipc

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...