Questions & Answers for: Nintendo DS flip top

My DS touch screen flashes once when the power switch is flipped, then turns off. My DS lite touch screen flashes once when the power switch is flipped, then turns off. Here are some things that ...

Ad

Question about DS Lite Console

1 Answer

...top screen goes white/ to resolve this i have to flip it down and open and the screen is working again . this can happen several times during any game. My ds has the same problem, except it stays ...

Ad

the top screen s really loose and flips back anf fourth my top screen on my ds lite is loose and flips back and fourth Try buying a tri screwdriver on ebay and using this guide: ...

...flip the ds open after you turn it on,the top screen is still not lighting up properly. It has been dropped but shows no damage. looks like you might need to replce the screen easy enough to buy on ...

...top end of the board near the hinge. The ribbon cable could be faulty do to rubbing on the inside of the hinge, check if the image on the screen changes when you flip the lid towards you and back, if ...

...flip cover is facing away from you and press down on the top of the game socket. This just makes the cartridge fit in the socket a bit tighter enabling better connection to the pins. I have drawn a ...

...flip the logic board over by pushing the bottom screen out.On the other side is where the ribbon for the top screen is.To get the hinge apart their are two more cross screws in the top left corner ...

Question about DS Lite Console

1 Answer

...flip the logic board over by pushing the bottom screen out.On the other side is where the ribbon for the top screen is.To get the hinge apart their are two more cross screws in the top left corner ...

Question about DS Console

1 Answer

...and the circuit board in the bottom half of the ds, this is a common problem with anything that flips open such as phones, laptops etc etc. as its a very common problem this means that parts are ...

Question about DS Lite Console

1 Answer

flip and slide, the problem is with the ribbon that connects the top screen to the circuit board in the bottom, now every time you open and close the ds this ribbon bends so as it keeps the connection

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...