Questions & Answers for: Brother HL feed problems

Non stop paper jams My Brother HL 5140 won't feed the paper correctly. Every piece is feeding crooked and causing a paper jam. I had this same problem. I finally noticied that the problem occurred ...

...the problem is.. This printer will not print your label sheets out of the main tray. You have to feed them in via the manual feed on the front because the printer recognizes that it is printing ...

Paper feeding problem My printer either wads up paper as it feeds thru, or will feed extra sheets of paper. Any clue why this happens? I have tried several different brands of bond paper. Clean the ...

...feed problems. Try cleaning the feed. you may have to remove the black gear with a spring on it temporarily to get the feed spun around... do not remove any pins from the gears these are timing, and ...

...went in lopsided--- can't remove it the only solution for this is to dig it out remove the paper feed cartridge, open the printer up and remove all corona wires, and anything that will slide out ...

...will not print. This usually means a print job is stuck in the queue that was set to "manual feed" or to a different paper size, such as legal. Add paper to the front manual feed and press

paper feed stopped working when inserting a replacement carthrige paper feed worked fine until I inserted a new carthridge, HL-2040 brothers printer. After installing then reinstalling when paper feed

paper feed problem pull out the paper tray and clean the feed roller inside the machine with alcohol or water I don't even see where the problem has been posted.

...cleaned to correct this. Using same form for past 11 months no problem till now. try cleaning the feed roller above the paper tray.. but if you have problem when the image is getting lower, it

...feed into the printer. You hear all the movements in the printer and an attempt to pull the sheet in. It usually tries 2 or 3 times and the paper advances a few mm, but stops. If you help push the ...