Questions & Answers for: Dell Inspiron error in battery

...error as the LCD is functional. If the battery is not recognized in the BIOS or you get an warning the AC adapter is not recognized, then you may have either a damaged AC adapter sensing pin (Fine ...

battery wont charge and getting error 0148 My dell 1525 laptop's battery wont charge and on start up it states error 0148? Please help. 0148 error is IDE ERROR: status (x) (s) This could be a problem ...

...error on Dell 1501 Inspiron laptop. AC Adapter does power laptop but Battery will not charge. myabe the battery is faulty have you tried replacing it? check the lights on your battery.. its an ...

...battery was charging fine I turned the error message off. However my laptop has now stopped charging and can only be used with the adapter so I would like to turn the error message back on so that I ...

error regarding battery not charging so replaced battery and now when I turn on the computer it will not boot and flashes briefly the following error code RS485-BR#23931 This error code means that the

...error code do to my battery life which expired? If you ran diagnostics with an empty cd/dvd drive you will get error code like this. If means that cd/dvd drive was not able to find a good media. If ...

...out what the exact error is will help you in towards the proper troubleshooting action cheers djbr1ck More than likely this is a low battery, either the charger is defective or you need a new

battery Error Code:2000-0133 This error code shows that the battery has got completely damaged or about to damage. the last thing, if you are using a duplicate battery, or no battery in system, then ...

...battery error light or replace battery (borrow a working battery to test - or attempt a start without the battery in the laptop) 2. Dead or damaged Power Supply- look for power-on light to confirm ...

...battery error light or replace battery (borrow a working battery to test - or attempt a start without the battery in the laptop) 2. Dead or damaged Power Supply- look for power-on light to confirm ...