Questions & Answers for: engine replaced 97 grand

...engine revs remain high after starting Possibly the oxygen sensor. Had same problem with my Accord, had oxy sens replaced and that not only fixed the problem but I got better gas mileage after

...replaced fuil fillter fuil regulater air intake manifold ( planum) cleaned injecters re-gaped sparek pulges (60) 97 pontaic grand am 3.1 m tr60 trans If im correct i beleive those engines have ...

...replaced instrument cluster. Engine starts but will not stay running. What is the problem? Call dealership and find out if it's a "PMI" system. If it has to be PMI'd at the dealership, then the old ...

...97 Pontiac Grand AM that currently has a 2.4 L quad 4 dual overhead cam with a 5 speed automatic transmission? Can find any information through the searches I have done on line. Changing from a 1992 ...

...replaced it with a 2.4 motor out of a 97 grand am. The knock sensor was changed between the 98-99 model yrs. my question is how can i hook my 99 knock sensor up to the 97 motor As long as you can get ...

...engine light on,1997 Jeep Grand Cherokee,4.0 six cylinder.code 1757.cleared code,comes back on after a few minutes of driving. Trans is sluggish,when pulling out,after a complete stop. I just had ...

...engine and is not showing any codes, any ideas ? I'd go with replacing the fuel filter, especially if it hasn't been replaced. It should be replaced every 12,000-20,000 miles. I would check the fuel ...

...engine lights on. Was running perfectly. What is the problem? I have replaced alot of transmissions in thease vans, i would try changing the filter and fluid, if that doesn't help you may be looking ...

...pressure sending unit leak oil on my 97 grand prix gtp 3.8 engine ? Because its bad. I have unplugged some before, they have that silicon seal, and there would be oil inside the plug. Just replace

...replaced the distributor and timing chain on our 97 Plymouth Grand Voyager and now it won't fire. could the timing need to be set and how do you set it? What could be causing this? All timing marks ...