Questions & Answers for: Eureka ende

belts breaking frequently I have the Eureka 2961 model. The belt broke recently and I replaced it according to the directions. Aflter I started the vacuum within 60 seconds the new belt broke also. ...

Just need to know how to change the belt on my vacuum cleaner It's an Eureka Altima 2996AVZ Step 1: Lower handle to floor to change belt Step 2: Remove the two screws from the top hood on the foot ...

The plastic ends on the brush roller have melted. Eureka Altima Model#2996AVZ Bearings in the end of the beater bar have gotten dry/ dirty and created enough heat to melt the ends. I'm afraid you need

How do you clean/take apart the roller brush ends. One end turns easily, but the belt end is somewhat harder to turn. one end is usually fixed the other is not :pull staight out on the end with the ...

A cap on one end of the roller brush is centered and turns freely. The one on the other end is not centered and does not turn but does not look broken. It looks like it's supposed to be that way but ...

The suction for carpet cleaning is great but there is very little suction through the hose. I have cleaned out the hose but there is still very little suction. What else can I do? Have you tried ...

How can I disassemble the Eureka Altima Brush Roll (#60844-7) for cleaning? Thank you, Jerry in Irving, TX You can remove the two screws in the top cover above the roller. Then lift off the top cover ...

My brush roller is loose and making a loud noise and keeps reseting. I Have the same problem. It is the end of the brush roller opposite the belt end. It binds up and gets hot, then melts the plastic ...

I have Eureka model 2961. The bearings on the end of the roller have seized and melted the plastic end. I was wondering if you know where I can find replacement bearings and a new plastic end cap. ...

How is it possible for the one end of the brush roll to come off and can I buy it instead of the whole roll? The end that usually "comes off", as you put it, is the belt end of the brushroll. The ...