Questions & Answers for: Boston Acoustics up down button

...down to 00, push and hold the volume button in for ten seconds until the unit beeps, than you can turn the volume all the way up to 50, which is the max, and than push the button in again to set it. ...

...down to 00, push and hold volume button for 10 seconds until beep then release, then turn volume all the way up to 50 (max) and push and release volume button. To perform a "soft reset"(all settings ...

...down, but you unplug the power cord and press the on button to discharge any stored charge. When you insert the card, be sure that you'v touched off on either the powersupply or the frame to the hand ...

down button, after step 1 of the programing sequence, you must press the down button of the speaker system and then press the down button on the remote four times. This goes for the other buttons (i.e

...DOWN button and wait for the flashing light just as I had for volume up. Problem is, you never get a flashing light.Today, I spoke with a rep from Boston Acoustics who patiently explained that step ...

...DOWN button and wait for the flashing light just as I had for volume up.  Problem is, you never get a flashing light.Today, I spoke with a rep from Boston Acoustics who patiently explained that ...

...DOWN button and wait for the flashing light just as I had for volume up.  Problem is, you never get a flashing light.Today, I spoke with a rep from Boston Acoustics who patiently explained that ...

button in lower left corner, go to Control panel, often abbreviated "CP" then click on system then on device manager and see if Sound, video and game controllers has an audio device listed. If not you

...Down, Mute, Power: repeat the steps for Volume Up, except press the button on the soundbar you wish program to the TW remote while the soundbar is flashing orange. It should become steady before you ...