Questions & Answers for: dodge caravan blower motor relay

...dodge gran caravan blower for heater and defroster only works now and then Check the heat/ac relay first making sure it is working.remove it clean the contacts and reattach. Then check the Resistor ...

...dodge caravan is not working. heater motor in my 2005 dodge caravan is not working.The motor quit. Put in a new motor and it still does not work. Any solutions? check the fuses and the blower motor ...

...dodge caravan. blower motor only worked on high then quit. replaced resistor, and the relay for the blower motor curcit, and still nothing, what else could it be the blower motor itself an open fuse ...

...Dodge Caravan. Blower motor does not work on the lowest setting. All other settings work fine. Well it sounds like the blower motor relay needs replaced. i would be pretty sure the blower resister ...

Dodge Grand Caravan Sport the front heater/air conditioner blower stopped working but the rear blower still works fine. Could it possibly just need a new front relay blower? First check the voltage at

dodge grand caravan with front and rear heat and air . i am looking for all the fuse and relay locations for the front blower motor ? the rear heat and air work but the front blower motor wont turn on

Dodge Caravan LE 3.8L, Vin L 1996 Dodge Grand Caravan SE 3.3L, GAS, Vin R, Eng Cfg V6 1996 Dodge Caravan Sport 3.3L 1996 Plymouth Grand Voyager SE 3.3L, GAS, Vin R, Eng Cfg V6 1996 Dodge Grand Caravan

...dodge grand caravan blower will not cut off Blower motor relay is stuck on. Replace relay. Relays don't usually stick on. Look at the controller. It can be scanned. there can be a few things that can ...

...dodge caravan when put in reverse or turn on backwindow defrost hetter blower quiys working how to fix press the helpful button, check link below Sounds like a bad wire,relay, loose plug, or bad ...

...Dodge Grand Caravan front blower RELAY location? For the front blower motor, there isn't an individual relay. Note the diagram. The two wires at blower motor, one should be voltage and the other ...