Questions & Answers for: HP LaserJet dhcp settings

Question about LaserJet 4100n Printer

1 Answer

...set the unit back to factory settings to remove the static IP address, figure out how to unlock the setup in the menu. I am using DHCP. turn off printer, hold down green button while turning back

Ad

Question about LaserJet P2015n Printer

1 Answer

The HP Laserjet P2015N is showing an IP address of 0.0.0.0 it is set to pick up an IP address fron DHCP but it is not. I have tried Factory Rest and normal cold rest. Any ideas? Also we have a few of ...

Ad

Question about Laserjet Cp2025n Printer

1 Answer

Not picking up an IP address. Just a local 169 address. Printer is set up w/manual DHCP. Regular DHCP won't pick up an address either. Would like to know how to perform a 'cold reset''. Turn off dhcp.

Question about LaserJet 4100dtn Printer

1 Answer

...and i have 3 computers tryin to print to them. On ALL PC's except if you have a server, Disable DHCP, START>>RUN>>services.msc enter.... scroll down until you find DHCP, set to OFF ...

...free upgrades to the 620. Connect the printer to your network (assuming your router/server supports DHCP). Boot up the printer and print out the JetDirect IO configuration page. Once you see the IP ...

Question about LaserJet 5100dtn Printer

1 Answer

settings must I use with DHCP to automatically pull the IP address and be identified on the network? HP 5100 dtn On the control panel, navigate to the Configuration menu and within it, to the EIO menu

Question about Color LaserJet 2600n Printer

2 Answers

...under Windows 7 until I attempted to use it with a different Internet configuration that requires DHCP to be enabled. After enabling DHCP, I cannot print anything. Is it possible to configure an HP ...

Question about LaserJet P3005n Printer

1 Answer

...install the printer onto the Network it will automatically find an IP Address, this is called "DHCP". In order to change the IP Address the printer needs to be setup as what is known as

Question about LaserJet 5100tn Printer

1 Answer

users can't print through DHCP network The IP address needs to be set to a static IP that matches the IP address that is configured in the driver. DHCP stinks for printers if the DHCP server does ...

Question about LaserJet 4 plus Printer

1 Answer

...All you need to do is set it up as a TCP/IP printer and assign it an address (either through the DHCP server or by giving it a static IP address), then go into the two machines and add the printer ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...