Questions & Answers for: cruiser convertible problems

Losing power I have a 2005 PT Cruiser and while I am driving it will start to stall and lose power but doesn't completely shut down. I have taken it in about five times now and it seem they can't find

toyota cruiser problem I have an 85 fj60 that keeps cutting out. the catalytic converter has been removed, the fuel filter is new. As soon as the engine is relatively warm, the engine cuts out when ...

...cruiser convertible right windows will not work after i left radio on and ran down battery also top wouldnt go down but after taking out main fuse and putting back in now everything works but the 2 ...

The pale orange engine light on the dashboard came on in my 2004 PT/Cruiser. I heard such things that even the catalytic converter may do this. What else could be the problem? engine lamp is a ...

...cruiser converter" you will see plenty of option. I will warn you that buying an inferior converter will leave you with more problems. Buy one from a reputable manufacturer. Direct fit after market ...

cruiser transmission just quit pulling at 30 mph. under slight acceleration. put in park and pin holds vehicle. trans full and fluid clear and red not burnt. checked plugs and all seemed pluged in. if

my 05 PT Cruiser Shakes like it will stall when you turn on a/c fan..what is wrong? it seems to only happen when you turn the AC or defrost fan on ..but what would cause this? I had the same problem ...

po 846 on pt cruiser is code 846 a sensor problem or could it be a bad torque converter I doubt the problem is the torque converter. Three digit codes are brand-model specific. Code 846 for Chrysler ...

...Cruiser convertible turbo, 54,000 miles. Car stopped running suddenly. Traced it to a bad ignition relay fuse. Problem solved. Now, the driver's side power windows do not work. Get the service and ...

...cruiser ran fine then started running funny and stoped.it will start but when i put it in gear it dies.replaced fuel pump same problem can be a few problems if any codes have scanned and start with ...