phone was just not picking up the signal. Base unit plugged in and power coming through to power the red light on base, but when you press the call button on the handset it beeps, as if to say there's
cordless phone does not connect I have a corded phone that also has a cordless base and phone as part of the phone package. The corded phone and answering machine work great. The cordless phone says ...
...cordless phone will not work well. If the VOICEMAIL light on the base is flashing in the presence of unheard messages, however your handset does not display MESSAGE WAITING, it is likely your handet ...
...Cordless Phone Model DSS7855. frequently fails to connect to an incoming call, with 'out of range' indication. The phone is less than 1 meter from the base station. The handset/base keeps a record of ...
Question about 26998GE1 Cordless Phone
...Cordless phone with one main phone and two extras The electricity went off and now only the main phone works and the other two say unavailable Ge Telephone Solutions Handset can not link. ? If any ...
...cordless phone. It has 3 receiver. 1 of the receiver all ways says unavailble and it does not ring or can't call out. Can you help me with phone? Thank you, Sai. UNAVAILABLE Indicates the handset is ...
base are within range of each other. Switch the mains power off, wait five seconds and then turn it on again. This will reset your product. Carry out a reset procedure on both the handset and the base
cordless phone long range /till 25 km Cordless Phone SP-922 Long Range Telephone System EnGeniuse till 5km -- For the SP-922 it can Support 4 Line from the PSTN Line Analogue and you can Program up to
Question about 27990GE3 Cordless Phone
...cordless phone from merely getting "near your base / charger" and gaining access to your dial tone to place calls on your phone line.If the battery is low, it should left to remain on the base / ...
phone says check ac power The base phone says need ac power and the the cordless phone saysout of range or no power at base phone The base unit is indicating it is not receiving any AC power.
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions