Questions & Answers for: Admiral cold water

...water (not cold) I have ensured the cold tap is working... But when I start the washing machine it only uses the hot water. I cannot find a setting on the machine to select hot or cold. I have tried ...

...water is cold? The hot is hot and cold is cold but warm is cold. There is too much pressure on the cold feed, reduce the pressure on the cold by partly closing off the tap on the cold. Or ensure the ...

...cold water supply hoses and tighten. Turn the water valves back on and try to run a wash cycle using cold. If hot water only is entering the wash tub the water supply is ok. If this is the case you ...

...cold water is not working No cold water will come into the maching today. Hose/filters are clean, and cold water is getting all the way to the washer. Hot water works fine. Can't use the washer ...

cold water connected but only the hot water works. rinse cycle not working at all. Hi from retired Englishman in SW France, (check these things but for 'cold' only!) Rinse uses cold only so it

...cold water IS turned on. Also, why would hot water come out at ALL on the cold/cold setting? Issue comes and goes, sometimes there is no problem with it. This seems to me to be that the hoses are ...

...cold water mix with the hot when the switch is set on hot 4 water temp settings- cold (I assume all cold water) cool (I assume mostly cold, a little bit of hot water) warm (I would think perhaps half ...

...cold water doesn't work. It will wash on hot but no water comes out on cold and only hot comes out on the warm setting ? Please help replace the solenoid on the cold water inlet as the coils burn and ...

cold water isn't coming on, only hot? The cold/cold on dial doesn't come on but on the cool/cold I get only hot water on this! Not sure what ur saying have u tried changing the hot cold hoses and see ...

...cold water flow? No cold water changed the inok cold water on rinse cyle onlyot water let water valve which worked at first now stopped again, h Could be water pressure isn't strong enough not fully ...