Questions & Answers for: cold water

Ad

Question about Energy Star 44092 Front Load Washer

1 Answer

...cold water problem I only get hot water even if i change the rinse tempeature switch to cold/cold. that's odd. if you choose cold/cold then check your hose orientation. you could have put the hot ...

Ad

Question about WM-1832C Front Load Washer

1 Answer

Cold water Washes When we use the cold wash cold rinse option it adds cold water then piping hot water is this normal? We have a wm1832cw front load LG wash machine. It is normal for the machine to ...

Ad

...cold water does turn on/off successfully - if I try to run cold cycle with hot water off and cold water on no water fills but the cycle runs - if I try to run cold cycle with hot water on and cold ...

Question about 40 GAL ELEC TALL Water Heater 6YR SC 82VH402

1 Answer

cold water hook up on a 71-40d which is which top and bottom Tanks are marked with Hot and Cold. 1) If water connections are on top of tank, look for red marking or word HOT that shows where hot water

Question about Elite 45986 Front Load Washer

2 Answers

...cold water inlet valve doesn't open after pressing start in any mode (hot/cold, warm/warm, etc.) If I connect hot water hose to cold inlet and cold water hose to cold inlet, the hot inlet valve opens ...

Question about Elite 45986 Front Load Washer

2 Answers

cold water valve on the Dexter T300 machines but it is a 2 coil valve. does the hot water valve supply only hot water or does one side provide water to perhaps the soap dish? does the cold water valve

...cold water. When the water temperature switch is set to the cold/cold position the washer does not fill with cold water. W I have a Kenmore washer model 110.98762792 and im having a problem with the ...

...cold water mix with the hot when the switch is set on hot 4 water temp settings- cold (I assume all cold water) cool (I assume mostly cold, a little bit of hot water) warm (I would think perhaps half ...

Question about AW22 Top Load Washer

1 Answer

...cold water coming into machine when selecting water temps. no cold water comes into machine. hot/cold= no cold water for rinse. warm/warm=only hot water. cold/cold=no water at all. Follow the cold ...

...cold water problem, it may have filled with hot water and gone through wash cycle but as it got to rince it only fills with cold water ,the buzzing may be the cold water solenoid staying open and if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18520 Answers

john h

Level 3 Expert

23504 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...