Questions & Answers for: Averatec cmos change

...change the cmos battery on my Averatec 5110 laptop. Please anyone knows where to find it. I don't know if there are multiple revisions where the CMOS battery located, but this information is from my ...

...CMOS settings.It reverts to2003 when you reboot. Any ideas why and how to fix this? Joe Need to change the battery on the motherboad. Any walgreens should have the one that you need. If you feel ...

...time when shut down ? clock loses correct time every time laptop is shot down ? Most probably your CMOS battery needs replacing. On your motherboard there is a small battery called a CMOS battery.

...CMOS battery. It is round like a watch battery and if removed for about 10 - 15 seconds, it should reset the BIOS to default and also the date/time settings will be incorrect, so be sure to change ...

to change the CMOS battery? You have the open completely your laptop, to the main board. Then you will see like a watch battery, that is the cmos battery. There isn't any other way to do this. Regards

...AC connected the CMOS clock holds the time. I have changed the CMOS battery with no help. change the MB battery..i thing there is no power left in it. try it qand wrote bqack to me with the

the laptop back to factory? The only way to reset the BIOS is to take the laptop appart, remove the CMOS battery and short the reset jumper on the motherboard. Unfortunately this is unrealistic unless

general tab and change the time to the correct, it if does not keep time in the bios, then you must replace the CMOS battery on the mother board, you can usually find them at Best buy for about 5 buck

how do i change the cmos battery If you open the computer and can see the battery then just pry it out with a small blade screwdriver. Installation is just putting the battery back in to the holder.

...CMOS. The computer does not respond to the keyboard strokes It continually wants to use same commands. Why and what to do? Try a known good keyboard. If that fails load linux in dvd only mode and try ...