town and country you should have to turn in the caliper piston there is a special tool for this looks like a cube and has different notches on it for different cars,you can get it at like autozone for
How do you change the rear brake pads of an 2008 TC just lift up and there are tro blods that hold the caliper in place the pads jusd slide up replace then just bolt back
Chrysler Town and Country Replacing the Rear Brake Pads Process is typical except for the rotating (screw type) brake piston. You cannot just compress the brake piston with a C-clamp, you have to turn
...chrysler town and country soft pedal usually indicates air in the system. when you put it all back together and applied the brakes did you check to see if the brake fluid in the master cylinder was ...
...Chrysler T & C minivan. We are on a road trip and the rear brake pads have hung up twice causing the rotors to get red hot. I have been able to free them up by tapping on them with a hammer. I do ...
...Town & Country Limited [email protected] . Need a tool, to turn the parking brake adjuster, as you push piston in If you open bleeder valve, it will be easier You have to flush brakes on all ...
town and country,..rear driver side brakes heating up making loud hum noise,..just replaced caliper and still doing it,....help what do i do??? Check the sliding hardware that the caliper bolts too. A
...chrysler town & country van Have rear pads off and piston seems to be stuck. does not want to compress Just changed the brakes on my 2008 Town & Country. You need a rear disc brake caliper ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions