Question about 2002 Town & Country
...Inner Tie rod on 1994 Chrysler Town & Country? My shop said I need to replace both inner tie rods and bushings, but would require special tools. What special tools are needed, and what steps to take ...
...chrysler concorde, how to take off the inner tie rod? Not sure If I need a special tool to take off the nut. I used this website: http://www.allpar.com/fix/intrepid-steering.html It worked perfectly. ...
...inner tie rod ends first if it has those round bushings that always go bad disconect inner tie rod ends behind engine on top of steering rack then remove rack from wheel well replace those inner tie ...
......
...can someone supply the torque values for the tie rod end / steering knuckle bolts? thanks 45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock ...
...chrysler town and country left inner tie rod replacement To make it easier, when you stop at autoparts store, ask for a "crowsfoot wrench'" to fit the new inner tie rod. Should be able to get it in ...
inner tie rod on a 2000 cirrus with a 2.5 and cant figure out how to get old one off to get the inner tie rod out you need an inner tie rod tool, it's a long tube that fits a 1/2 inch drive rachet and
...inner and outer tie rods on a 2004 Chrysler Pacifica - I waqs told buy a trusted local mechanic that I need to replace 3 of the 4 tie rods. Might as as well replace all 4, but how hard is it to do ...
Question about 2007 300 Touring
need to know the factory specs for torque for tie rod ends for chrysler 300 2007 I have a chrysler 300 m 2002 and i was wondering what the torque is on the inner and otter tie rods
Chrysler Concorde? I'm having trouble accessing the iner bolts. well, the outer tie rod screws directly onto the inner tie rod. The inner tie rod is connected directly onto the rack and pinion
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions