Questions & Answers for: AT&T change phone line pulse tone

...phone on tone, but it only works one call at a time, resetting the line back to pulse when I hang up. You?ll need either a 6-button or a 24-button set SPIRIT CS administration. First the control unit ...

...HEAR THE DIAL TONE. Make sure your phone is in Tone and not Pulse dialing. To change it for your phone, just look in your manual. If you don't have one, I have included a link for you to d/l it. ...

...phone system will only dial out on a pulse setting. How can I change this on a AT&T Spirit system? You?ll need either a 6-button or a 24-button set SPIRIT CS administration. First the control unit ...

...you may be analogue pulsing which takes forever wait wait wait or change your phone to send tones instead.do this or check this in the menu for whatever kind of phone you are using....i hope this ...

...change tone to pulse Thanks for visiting FixYa! First, here is a link to your User's Manual in case you don't have one: ...

...change the Dial Type to Tone. Then use OFF to back out of the selection and again to clear the menu. Attached is the link to the manual. Click the button on the screen to "Open as PDF" and you can ...

...line corded phone that does not use a power adapter. (As long as the EP5962 corded base will work without power (POTS), it might work for the tests below. You might want a simpler phone to carry ...

...phone line at the wall socket make sure it is plugged in tight, also check the the connection at the base unit.If this does not work then ring the phone company and get the to test your phone line, ...

...phone started with static on the line and no dial tone. It is only 18 months old. I unplugged it and plugged in a standard phone which worked fine. I used another cord, same problem. I switched to ...

Whenever I place a call and am asked to dial an extension , I keep getting the message to enter the number and am unable to complete the call. It's an At&T cordless phone... The automated recording ...