20 Most Recent AT&T DECT 6.0 Cordless Phone System with Digital Answering Machine Questions & Answers

I lost my manual how

You didn't iinclude the model number, so here is a link to AT&T manuals. If you like send a comment with the model number and I wiil try to help more.

http://telephones.att.com/att/index.cfm/customer-support/manuals/#40000

AT&T DECT 6.0... | Answered on Oct 30, 2018

1 Answer

I need the set up a computer part of the manual

I would suggest that you go through this guide, it will explain you every step which you need to make to get your modem and internet connection back on track:
The ultimate Link Troubleshoot guide: Problems. solutions, PDF manuals

AT&T DECT 6.0... | Answered on Jun 24, 2018

2 Answers

The handset has out of range or no power at base, how do I fix?

I found this solution in a Amazon customer review!! Worked right away in 2 seconds! Punch in *331734#MenuSelect (including the asterisk and the hash mark). Good Luck.

AT&T DECT 6.0... | Answered on Apr 10, 2018

0 Answers

Previously registered handset

AT&T DECT 6.0... | Posted on Aug 19, 2017 | Be the first to answer

1 Answer

Caller id does not work on att phone since switching to uverse internet and phone

Caller ID is a service your phone company provides, it is not automatic.

AT&T DECT 6.0... | Answered on Jul 07, 2017

0 Answers

After 4th ring, there is a loud buzzing noise.

AT&T DECT 6.0... | Posted on Jun 16, 2017 | Be the first to answer

0 Answers

I do not know how

AT&T DECT 6.0... | Posted on May 31, 2017 | Be the first to answer

0 Answers

How do I Reprogram telephone numbers or change numbers in the telephone directory?

AT&T DECT 6.0... | Posted on Dec 08, 2015 | Be the first to answer

0 Answers

How do I reprogram telephone numbers?

AT&T DECT 6.0... | Posted on Dec 08, 2015 | Be the first to answer

0 Answers

I cannot use handset to answer calls or to send calls. Message says "Press find HS on base 4 sec. Then Press#pm handset: I have done this doZen of times Nothing happened. Message still on. HELP

AT&T DECT 6.0... | Posted on Nov 24, 2015 | Be the first to answer

0 Answers

Reset answering machine message.

What model AT&T DECT 6.0 system?

AT&T DECT 6.0... | Answered on May 12, 2014

1 Answer

How to open the base

first thing is use a hair drier, If you had a air compressor that may be the best. unplug it take out batteries right away. Place what ever you have over something warm. in the sum just don'nt forget to bring it in. Do not plug it in for 3 days if still sealed like a phone. you must have heat over 110 degrees for water to evaporate. A watch on your had will only dy out if you wear if for a few days. Leave the watch down on dreser for a few days, you will loose it to corossion because a lot of water like a drop in a watch needs heat to evaporate it out of the tiny crakes in electronics. Water will normally short electronics out right away. Only thing I know that survives a lot of water from storms or spills are radios.

AT&T DECT 6.0... | Answered on May 11, 2014

0 Answers