Questions & Answers for: Zebra change offset

...offset by about .050" any advise other than in the layout on screen? The postition of the print on the label must be controlled only by your software, it cannot be changed at the printer. Therefore, ...

...change the print head, turn the power back on and re run your software to get the forms to reload. If you miss any of these steps you will run into trouble. As long as the labels didn't get moved, it ...

see if you can set the printer preferences to borderless printing. Go into the zebra utilities and change the printer settings to 4"x6". This will fix your problem

Zebra Z4M Plus Our Zebra Z4M Plus label printer is having an issue with alignment where it prints the text too far to the right and bottom of the stickers. We have tried changing the alignment through

...change the setting to the correct ribbon. Another reason your ribbon may be breaking is because the "X" offset is set too low or too high, in other words the printing is beginning too close to the ...

My Zebra P110i is not printing it's cards correctly, When I print a card, there is always a 2mm blank line gap on the end of the card where the printer has not printed on it. I've cleaned the printer,

...Offset in the driver under tools. Right click printer->properties->advanced settings tab->tools->properties. If you are not sure what the current value is due to not being able to print a ...

How do I change the Top Of form setting jscholten695: You have doing it in your label design software, inside printer you cant adjust this offset.

...change label size and this seems ridiculous. The second problem is that now when Zebra prints the label it back feeds each label by a few millimeters. If I print more than one label they will ...