Questions & Answers for: change magnetron kenmore microwave

...the transformer appear ok. I have replaced the high voltage diode and no change. If this is the transformer or the magnetron does it make sense to replace it or should I just buy a new microwave? ...

...magnetron. It is part number 2B71165R and you can get it from the Pros here for $68.59 (subject to change). For more free DIY and other help & advice, feel free to contact me via my site. William ...

...changed the magnetron. There is still another problem. He mentioned to me that when they change out the magnetron they change another part with it? Help! Hi! have you check the capacitor and hv

Kenmore 363.62709200 turns on and spins, but doesn't heat food The most common problem it seems on the microwave is it is working but no heat. That indicates a problem in the power circuit. 90% of the

...microwave shuts down and flashes F-9 it is possible that the magnetron is faulty as there is a load indication to the board. it can also be the failure of the capacitor, the board or a faulty thermal ...

...kenmore elite microwave oven what would be the approx cost for repair? It would seem that you have a problem with the power supplying the magnetron. In other words the internal temperature is not ...

...Magnetron change or repair? Please let me know what can I do. Thanks a lot. Hi, Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven.... Microwave Oven Basic ...

...change light bulb in 721.63109 300? The lamp is mounted in the plastic duct that guides air over the magnetron tube (the microwave source). If you take the cover off the oven you'll see the lamp ...

magnetron. Unplug microwave, remove top, [several screws] look over to the keypad and slightly to the left, you should see round fuse mounted on the inner chassis at the top, change with the same size

Kenmore 62463 / 721.62463201 Stainless Steel 1200 Watts Microwave. My daughter used it as a timer for reading and set it to cook for 30 minutes with nothing in it. It turns on but is loud and no ...