Questions & Answers for: Bosch causes of surging

No Water My dishwasher comes on, but does not fill with water. there may be a few things causing this, a blocked supply/transfer hose in the base, a blocked meter tank at the side of the dishwasher, ...

What caused the copper coil in the operating module to burn out? the operating module is part # 265760. thanks. The most likely thing that burns them out is a power surge...the coil is the weakest ...

what does f 21 mean when it flashes machine will not work F21 is a motor or control board fault. This also can be caused by voltage spikes or surges; to reset it... Turn the appliance knob to the off ...

f 21 is flashing not got a reset button no lights are lighting up F21 is a motor or control board fault. This also can be caused by voltage spikes or surges; to reset it... Turn the appliance knob to ...

After a lightning storm my bosch single 30" wall oven displayed an F03 err. I turned the power supply off at the breaker for one minute as directed by the oven's manual. This action did not ...

C7 is code C7 is displayed when the primary fan (the one in the middle just under the copper heat exchanger) does not spin or the computer does not recognize that it is spinning. There is a plug on ...

C7 error code I have a Bosch Aqua Star GWH 2400 ES NG with Error code C7. Ran through diagnostic, 5D = 00. What does this mean? C7 code has to do with your main fan. Either its not working due to it ...

Oven is two weeks old. Town had a power outage we reset at breaker but still just beeps once and nothing happens We tried resetting at breaker and then left off for longer. When flip breaker it beeps ...

I have a Bosch PKG775DB1Y electric cooktop. It won't turn ON. I am NOT in Lock mode. After I disconnect power for a few seconds it starts working OK. Randomly the problem will return. Any ideas? By ...

just installed a new control panel on my bosch dw silence plus 44-dba and no lights on display panel come on,i have tried all power sources to the unit and all have power the door latch seems to be ok