Questions & Answers for: broken fishing rods

...fishing reel. The aluminium cage is broken and finding difficulty in locating replacement.Number stamped is K1650-21.Can you help please? Thanks but found the part I need on e bay. think it was the ...

How do I change the Impeller on a 1980 Evenrude 70HP Outboard Motor remove the lower unit after disconnecting the shift rod . and you will be right there . caution needed if any or the bolts are ...

...broken fishing rod. It has broken again at the same spot and I want to remove the original superglue to replace it. I used a darning needle to put inside the fibreglass rod at the break to strengthen ...

broken tip is still firmly glued on. You can melt the glue i think most fishing rods are made of graphite, and are very easily breakable. i suggest that you find a way to CAREFULLY saw or file off the

...always work. Needs a good cleaning. Take it apart you will see trip lever clean and lube. If it is broken you will need to replace. I have done this many times and always say I will do it in Spring ...

...fishing rod broken tip I pushed my seat back and broke the tip of my good graphite rod. The break was about 4" back from tip. I fixed the tip of my graphite fishing rod with a sewing needle and a 3" ...

...fishing reel handle? I have broken the handle and need to purchase a repair If you go to this website they will tell you if its available and give you the address of your nearest ...

i want to open the case because the wind-up mechanism for music has broken. i did not find any room to use a screwdriver or some part to be fix with clips. :( Robert, you are absolutely correct. I am ...

...broken handle and possibly damage to the gears to retrieve line. Popular Daiwa Goldcast Spincast Reel Medium Heavy ... www.fixya.com > Forum > Fishing Rods & Reels > Daiwa Popular Daiwa Goldcast ...

address to return broken fishing rod Great question!!!!!!!!!!!!!!!! Return to WHO?