Questions & Answers for: boiler reset Water Heaters

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

VOKERA UNICA HE BOILER - ONLY ONE YEAR OLD. DON'T HAVE USER HANDBOOK AND NEED TO RESET THE BOILER. IS THE HANDBOOK AVAILABLE ON-LINE? Vokera will send in post if requested

Ad

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

...reset button on my vokera nynute 14se central heating boiler is on. when i press it, it goes off but the boiler still does not ignite, what is the problem Has the boiler cool down? Try turn the power ...

Ad

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

copper piping and we just had a new larger expansion tank installed 6 months ago. If you have to push the reset button it suggests that the boiler/water heater is over heating.What boiler is installed

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

...boiler will automatically reset. Modern boilers are complex re safety and the boiler will only start if the exhaust fan is running and is up to speed . The vacuum caused by the fan trips a switch and ...

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

2 Answers

...reset the boiler by using the switch on the control panel (furhtest left switch). Hae a look in your manual & find out where the over heat reset button is. press the reset button to re-activate ...

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

...boiler is not working it just shows A 01 have reset but still nothing any ideas? Basic checks:- water pressure in boiler gas supply on Turn boiler on then:- does the fan come on - u can hear this at ...

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

...halted boiler, had red light before red light came on overnight on boiler didn't come on, pressed reset button, boiler now on but light is flashing blue and not permanent blue Make and

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

...reset boiler to ignite pilot light again. i have ordered a new PCB but i still think there is another problem due to the heat that the radiators are reaching need to change thermostat and a ...

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

...down with a red fault flashing light. Once the boiler has been reset and cooled down we can then fire it up again. I have checked the pressure and it's set on about 1.5 bars Sounds like a faulty

Question about FasNSeal FSWMKE4 4" Vent Kit for Wall Mounted Boilers & Wat

1 Answer

boiler line which is try to purge out by the pilot which is a very small hole so this would take for ever . Turn boiler of to try and reset it or you will have to purge boiler gas line .in the boiler

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...