...black box and a 3-pin plug. Ignore the other stuff unless you think you may need it (depends what country you're in and what your mains supply wall socket fittings are). Take a close look at the ...
...to record off of my Verizon DVR Box onto a DVD recorder. I'm only getting black recorded onto the DVD. How do I wire this properly to record ??? Thanks !! Press the red button tha has a text of ...
...box, and every 1-10 seconds, the screen goes black. The sound is not interrupted and the power does not actually shut off, it's just the picture that is affected. The TV is connected to a DVR box and ...
black but the sound is working. I am also hooked up to a DishNetwork DVR box. You will need to narrow the source of the problem. There could be a problem with the DVR box, the connecting cable, or the
...black screen in the DVR tv Is the cabling from the satellite receiver to the DVR hooked up right. It sounds like it's in single mode, but with the coax cable put on the wrong way. Unplug the power ...
...box and I am getting the black bars on top and bottom, which I didn't have on the prior dvr set top box. How do I get rid of them? TV is so old I cannot find the manual--I assume there is a zoom ...
Question about Xbox 360 Elite Console - Black
...dvr box (not HD connection). had to use inputs that xbox was connected to on tv for my dvr. how do I connect the xbox 360 now so that we can use it without switching out the connections? There are a ...
Question about 605 WiFi Digital Media Player
...box); it is correctly attached when it clicks on. -Take the Black Audio/video Marked "output" cable, and insert the connections into the corresponding coloured sockets, yellow>yellow, green> ...
Question about 605 WiFi Digital Media Player
...box and remote when the tv is black and the same the boxes when we hook the boxes up to the tv and came on but it went black and fuzzy on the screen and no picture did not show on the tv at all You ...
Question about 605 WiFi Digital Media Player
black wired long connector should be soldered onto the board... if you look closely at the connectors they have a sort of "Z" pattern that makes them only plug in one direction so it will not actually
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions
