Questions & Answers for: Ford Focus big end

end. Came off fairly easily. Once off, I could see the wire connector. The mirror has a short wire which goes through the body of the car and connects to the wire connector which comes from inside the

...end accident and after it came back from repairs, it is now idling very erratically. They said it was something to do with air intake on the fuel line or something? Is this a big problem or a cheap n ...

Big end bearings Renew bolts/nuts Yes Big end bearings Stage 1 15 Nm Big end bearings Stage 2 90° <a href="http://wallpapersimageshd.com/kajal-agarwal-actress-photos/">kajal agarwal actress

big nut on the wheel end and hold gearbox up with a block and tackle ,then gearbox will come back enough to change the clutch,but you must lower the sub frame to get gearbox to come back enough.What i

...2001 yes easy too do ,have the bearing pushed out and replaced the same way though do not try drifting it out with a big hammer its very dangerous and you could end up with a metal fragment in your ...

end ,use a lengh of scaffold pole or a big crow bar to pull the track control arm down so the ball joint come apart ,take the stub axle off and in the back is a big circlip but leave it alone and just

...focus without hearing the knocking noise its difficult to say as it could be a cam follower or a big end ,best advice is to check oil level then ask a mechanic to have a listen and see what he ...

...is a knocking noise what could it be? when i start my car there is a knocking noise coming from the front. i need some help here please? you need new motor sounds like big end bearings are worn ...

...end of the car This is probably just a splash guard that came loose under the car and hitting or dragging. Take a look under for something big and plastic that looks out of place around the wheel ...

...for Mains and Big end bearings.Cylinder head bolts and Flywheel very easy just go to reliable-store it has all manuals there many other websites also but in this matter this website is too ...