Questions & Answers for: banging noise transfer

banging could u help please frm a desperate owner of a wannbe chelsea tractor any pictures would be great my manual dosnt seem to have any in of the hubs. I replaced the autohubs on my 90 trooper with

banging or popping noise, it sounds like it is hitting the floorboard at times. thanks i have a 2003 s-10 zr2 by the way You either have transfer case issues or CV joint problems giving you a warning.

banging noise in 4 wheel drive under torque. front hub questions. I need information on the front hubs, are they auto locking or locked in all the time? Ive asked a few mechanics about the noise and ...

...noise with banging at the same time the drives ok then cmes bak ive changed my transfer case on my mitsubishi gto and tailshaft expecting the banging noise is cming from there but the noise and ...

...banging going on. I can hear the transfer case shift encoder motor making noise wanting to make the shift but it has a hard time completing this task until i perform this several times. I checked the ...

...banging noise from under car. mostly rythmic sound that increases with speed or completely disappears. sometimes one or two bangs then slight interval. transfer case is my best guess ,but a $1000.00 ...

...banging noise whitch is coming from the transfer case it almost sounds like the chain is jumping offf the gears but not sure has anyone heard of this noise and if so what is it The '97 Ram 1500 5.9L ...

banging noise when it finally switches back into 2 wheel drive While the driveshaft and u-joint suggestions all sound like good places to start, because of the way you describe, I have a few questions

noise from underneath the car. It sounds like metal brushing against metal. Is there something wrong with the gearbox or the transfer case? Hi ****, Take the vehicle and ask the technicians to inspect

...transfer case seems to be making an awful noise in 2WD. Any thoughts? I don't think you will know whats going on until someone takes the transfer case apart. It could be the shifter stuck in mid ...