Questions & Answers for: HP LaserJet how i adjust printer

...which way it moves then adjust from there. first try the color calibaration in the printer then adjust the x-axis & y-axis in the registration area if both options not working cold reset the ...

...printer but the HP 3050 printing just can't be instructed to do the same. How to adjust the top margin of my print out ? I need to do some adjustment and my New HP 3050 printer is not cooperating. ...

wall. i spec this tips solve you problems Yes, all hp software has an area under printer properties to adjust the actual toner laid down by the printer. Just go to the printer icon, it should be there

...printer setup (adjust the scaling % in the printer options) or in the application you are printing (adjust the page setup scaling % or it may possibly have the option to print 1 page high x 1 page ...

...printer! It stops as if it is too long for the machine. What should I do? Try adjusting the paper guides, this tray has the option to adjust the paper tray size for legal paper with a blue tab on the ...

...printer. What settings do I need to adjust or use to make it print laser printer quality? Run the PQ Troubleshooting and from the Print Quality SubMenu you should have all the adjustments you

than 5 paper?? it is need to change a roller?? The picker roll at the back of the unit is badly adjusted, it presses to strongly on the papers and creases them. You must open the printer and adjust it

...do I fix this? Hello, A couple of things to check. 1) Make sure the paper guides in the tray are adjusted correctly for width and in particular the length. 2) Remove the tray completely check ...

...I believe there's adjustment sliders on that printer you adjust to fit the envelope and then set it to manual feed. Don't have the manual here anymore but I've had two of them. They print

it could be a number of things.you could try a full color calibration.otherwise , i believe you can adjust the individual colors also.try to press go and -value+ keys at the same time.see if the color