we have several of these but one drains battery 4 times faster than others. Why? Try contacting Shure Tech support.
mic was dropped and quit working you could open the bottom and check the wires are ok, then unscrew the capsule and check those wires are ok. if you have a scope you could check the capsule. if none ...
Question about T2 / PG58 Professional Microphone
where can I by replacement parts for my shure wireless handheld transmitter pg58 If you have a T2 transmitter, there is a place in Chicago that repairs them. Try contact them. Delta Audio, ...
Question about UT2 / 58 / PG58 Professional Microphone
shure wirelesss microphone pg58 not on after replace battery Contact Shure Tech Support at 800-516-2525. They can help you troubleshoot the problem. Have the wireless nearby when you call them.
Question about PGX Series Wireless Microphone System PGX14B98HL5 Professional Microphone
Popping sounds when using this mic Popping Popping can be caused by many things. Call Shure Tech Support at 800-516-2525. They can help you troubleshoot. Have the wireless nearby when you call ...
Question about PGX Series Wireless Microphone System PGX14B98HL5 Professional Microphone
Consistent popping when using this mic setup We get consistent popping when using this mic setup. We have a face mic, the pgx1 transmitter and pgx4 reciever. I've changed the batteries ...
mic has static and popping sound. not working during use it started hissing and lots of static. no vocal response. Give Shure Tech Support a call at 800-516-2525. They can help you troubleshoot the ...
Question about 522 Microphone
i have a shure beta 58 a mic problem is when i turn it on nothing happens but a green light and turn off any idea which are to repair? The "Beta 58A" is just the cartridge on top. It would be more ...
...tech/engineer. (I did tighten up the ON/OFF connector, as it was loose on the dual-pins from the PC board, and in the A3 connector, the shield was touching one of the other pins)TC Dailey - Dailey ...
Question about PGX2/SM58 Microphone
The SMG8 is synced but will not keep signal if the mic is not right next to receiver (PGX4) There are many reasons this could be happening. Call Shure Tech Support at 847-600-8440. They can help you ...
Usually answered in minutes!
136 Questions
60 Questions
30 Questions
28 Questions