20 Most Recent
Shure UT2 / 58 / PG58 Professional Microphone Questions & Answers
I cant get my mic to sink
I assume you are talking about the RF A/B lights. If they do not come on, check the frequency to make certain the transmitter matches that receiver. If the frequencies do match, then the system will need to be repaired.
How to take apart a shure pg58 microphone
"PG58" is just the capsule on top. That capsule has been offered on many Shure wireless. We would need to know the model number of the transmitter (it is inside the battery compartment).
Our church wireless mic was dropped and the bezel
Go to this website:
http://www.shure.com/americas/support/service-repair/index.htm
at the bottom of the page there should be a section called "Replacement Parts" that has anything you could possibly look for. Shure is a small private company and has unbelievable customer service, so don't be afraid to call.
Not recieving signal
Make certain the transmitter and receiver are on the same frequency. If they are on the same frequency, then the system will need to be repaired. Try calling Delta Audio at 773-764-3634.
Not finding what you are looking for?
