Questions & Answers for: 2000 buick century drain valve

...2000 buick century 2000 buick century how to replace a coolant level sensor coolant light stays on 2000 buick century. Levels are good. How do I check or replace sensor? The coolant level sensor is ...

Ad

Question about 1999 Century

2 Answers

...Buick Century There is a plastic valve on the driver side of the radiator ,but to find it you must remove black plastic guard/shield under the radiator which is held in by5 or 6 screws. the plastic ...

Ad

...2000 Buick Century -- where is the valve to let out the coolant? --**** The drain should be on the drivers side at the bottom of the radiator, facing the driver. It's a plastic "wing" that ...

...you check to see if the pc valve is pluged up on a 2000 buick century transmission WE CHARGE 32.50 TO CHECK PCV SYSTEM. THE PCV VALVE HOOKS DIRECTLY TO MANIFOLD VACUUM AND CAN BE CLEANED OR

...Buick Century? I need to flush radiator. UNDO THE BOTTOM RADIATOR HOSE AND DRAIN IT OUT.. THEN GET SOME OF THAT BOILING TREATMENT AND LET THAT IDEL FOR 15 OR 20 MIN.. THEN PUT IN NEW COOLENT I cannot ...

...2000 Buick Century, I need to flush the system.. it is on the back/rear of the radiator side tank, u have to get under the car to see it, mine was on the passenger side in my 98, but it can be on ...

...2000 Buick Century? in order to do a proper clearing of the drain u must remove the blower motor under the dash on the passenger side behind the glove box. then the drain is at the bottom of the ...

2000 buick century. i need to know how to drain old fluid. take the bottom hose off from the radiator there is usually a drain on the bottom of the radiator called a petcock, turn counterclockwise. be

2000 Buick Century. When i press the brake pedal i hear air sounds but brakes still work just not like they should. if i pump the brakes then turn on the engine, the pedal easily goes on to the floor.

Question about 2000 Century

1 Answer

...to find and replace my camshaft sensor on my 2000 buick century 3.8 under water pump 1 10mm bolt 3.1/3.4 inbetween front cover and intake same 1 bolt (has long wire lead connector on front valve ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...