Questions & Answers for: 1998 ford explorer engine removal

Question about 1996 Explorer

2 Answers

...have a wrench that big, try using a long chisel on the edge of the nut and hitting it very hard with a hammer to break it loose. how to remove fan to get to waterpump on 1998 ford explore eddie

Ad

...1998 Ford Explorer with a 4.0 engine and a SOHC. I need to replace the thermastat housing. Is there to replace it without having to remove the intake manifold. Yes. You should be able to replace it ...

Ad

ford explorer starter relay is under hood on the drivers side fender area. Disconnect the battery ground cable (14301). Disconnect the starter motor solenoid relay switch wiring. Remove the protective

...1998 ford explorer with engine light on Take it to a mechanic and ask him to read the code, this should help you look for the correct repair. This could be as simple as removing the gas cap and ...

...1998 ford explorer 5.0. How can i solve this? This engine has hydraulic lifters that depend on clean oil with good oil pressure. Check the oil dipstick for proper level. Try an oil additive that is ...

1998 ford explorer/ need location to remove and 1998 ford explorer/ need location of starter motor to remove and part breakdown including solenoid If your going to be removing all of this I recommend ...

Question about 1998 Explorer

3 Answers

...1998-Ford-Explorer-Check-engine-light-light-flashing-sometimes-55948.aspx (3) the blinking check engine light means that the engine is misfiring - check your spark plug wires (they may need to be ...

Ford Truck Explorer 2WD V6-4.0L VIN K Flex Fuel to remove the cylinder gasket replace , do I have to remove the engine from the car? No, you do not need to remove the Engine to perform the repairs you

Question about 1998 Explorer

1 Answer

Ford Explorer 1998 If it's there is an diesel engine fitted, just remove the primary diesel filter with water trap and replace filter, on the petrol engine, that light indicates that you have a engine

...1998 explorer v8, thanks sherry In order to replace the oil pan or oil pan gasket or any other part you must remove the engine from the truck, there is no removal possible without the engine out of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...