Can you guys help me find out what i have in my hands right now? it appears to be a motorola motherboard but i dont know for sure, would you be so kind in contacting me to my email address so that i may send you pictures, thank you any help is greatly appreciated.

Motorola Support Find Answers Motorola Mobility Inc Go here to locate your product where you can get answers.

Right click on the wireless computer icon in the lower right hand corner of the screen. This will appear to be a computer emitting radio waves.
Select the "Connect to Available Networks" button
Choose the network to which you wish to connect from the list.

Press the "Connect" button to sync the connection, enabling your wireless.

I WANT TO LOCK MY MODEL EM30 AS EMEI NO 359612-01047691-8

the code should be 0000

Try 0000 (zero)

for connecting these sw
just see on mother board there you see nearabout 16 pins on right hand bottem of mother board
there you have an integation of connectorfrom right hand corner i.e 1-3 for reset sw, 2-4 for power sw and last switches for front usb and audio
if you have p-3 then you dont attech audio and usb cables on *********** board

try taking the phone and have the firmware reflash on the phone to correct this issue.

try to check if your memory (RAM) is compatible with your board. run dxdiag to see your computer specification

SkiMan. Used to add/remove skins to/from your Motorola phone. Updated Apil 08, 2006.

install this to your pc to upload skins or themes to your motorola and then go to mobile9.com for skins or themes

Delete it from your Razr, turn off the bluetooth and recharge it to full. Try pairing it again. Make sure you enter the passkey correctly. Check the manual for the bluetooth if you dont know what it is. It is usually 0000.