My IBM Think Pad T30 showin working on AC with out powering..

please you need to reset its bios. open the screws behind your laptop with keyboard icons to access your laptop cimos battery with care remove it for some time(3min), power on your laptop until it boots up. turn it off and put the battery back. the password will removed.

that may be due high band width and for more info contact http://tinyurl.com/m7ghqz

I don't think the T30 has an actual physical switch for the wireless. The ThinkPad button will show you how to do the wireless setup/repair. If you have Bluetooth on it, the Bluetooth indicator should be near the hinge.

Power adapter has to be changed

Make sure NumLock is OFF.

you need to be techy on this one. you need to open the laptop. before you do that, be sure to remove all source of power (ac adapter and battery). press and hold the power button to drain all excess power. check the motherboard and reseat the CMOS jumper. it looks like a tiny pin. after reseating the jumper, reconnecting power and turn on the laptop.

i hope this helps.

there is a switch in the plug end to the back of your comp its like a little swinging door that when you unplug out of back of comp this switch engages battery now if you unplug just from wall its going to see these 2 things the doors not shut but i have to keep working so it sets aside the plug still recognizing it of course but running off the battery trying to still find out why the powers not there but the plug is still plugged in and it will continually search until it reaches its falt point of dead battery
its like a battery backup for your system it gets unplug but wants to know where the power is

now in reference to the little swinging door i call it its a power over relay in your comp for some reason its not closing properly to allow battery to run by self
this is usually just a switch that needs adjusted in the motherboard configuration

there is a switch in the plug end to the back of your comp its like a little swinging door that when you unplug out of back of comp this switch engages battery now if you unplug just from wall its going to see these 2 things the doors not shut but i have to keep working so it sets aside the plug still recognizing it of course but running off the battery trying to still find out why the powers not there but the plug is still plugged in and it will continually search until it reaches its falt point of dead battery
its like a battery backup for your system it gets unplug but wants to know where the power is

now in reference to the little swinging door i call it its a power over relay in your comp for some reason its not closing properly to allow battery to run by self
this is usually just a switch that needs adjusted in the motherboard configuration

Do not under any circumstances turn it on for a couple of days.It should of not been turned on whan it got wet. You could of fried the motherboard. Let it dry till Monday, then you will know if the damage is done.

I agree with you and have a link for adapters http://www.google.com/products?q=IBM+ThinkPad+T30+2366+adapter&hl=en&rls=com.microsoft:en-us&um=1&sa=X&oi=froogle&ct=title