Question about Jack Lalanne Power Juicer (Stainless Steel)

2 Answers

Jack LaLanne Power Juicer

I have a Jack LaLanne Power Juicer and the holder on the motor that holds the blade is broken. Can I get a replacement part?

Posted by smer67 on

  • 2 more comments 
  • Anonymous Sep 06, 2008

    the plastic threads holding the blade have broken thus disabling the juicer

  • hash2008 Nov 24, 2008

    Yes, i have the same problem.

    I called the Jack lalnane parts department and they told me the only options i have is to buy the motor.

    i responded by letting them know that it will happen again because the part is platic and cannot hande the toruqe - the customer service rep responded by saying that i tightened it too much and i reponded and let him know that its not the tightening and the torque is too much for the plastic thread and buying a a new motor is not going to solve the issue, they need to come up with a replcement that will fix this problem once and for all.

    For now i will not buy a jack lalane juicer because this seem like a scam, the juicer i great and has a flaw in its design that disable it completely - seems like a money grab to me and looks like all the big stores are carrying a product they may losose on - buying another motor will not fix the problem - Jack shoul step up to the plate an provide a permanent fix - i will not buy the product and will share this with others.

  • jjholdings Jan 05, 2009

    I forgor to put the filter back in the machine before putting the blade in and now the blade will not come back out

  • Anonymous Jan 08, 2009

    This is a Joke, I also have the same problem...this is a design fault or just a very simple scam...its not good enough why is the plastic not strong enough to hold the torque..

    What a shame on this product..I got no choice but to by a new machine........!!!!!!



2 Answers


I called them on this problem. They don't sell the part to fix this the only way is to buy a whole new bottom assembly for a cost of 49.99. What a rip off screw you Jack.

Posted on Oct 10, 2008

  • johnny Aug 04, 2012

    Jack's dead...the poor design is probably not his know, they stand the chance of making more jack when the plastic part disentigrates...they definitely should have a way to rectify this problem...



Jeffrey Pemberton

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Hi smer67 - This is what it says on the official site about spare parts: See the back inside cover of the instruction manual for the spare parts order form or call: 1-973-287-5150
(MON-FRI 9AM to 7PM EST & SAT 9AM - 5PM EST). If this answers your question PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.


Posted on Aug 17, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I get the part shaped like a half moon to release the blade from the juicer:

Fit the stubby metal bits on the half-moon into the holes on the top of the blade. Hold the half-moon firmly and exert pressure to turn it to the right. The blade should unlock.

May 09, 2014 | Jack Lalanne Power Juicer 250 Watts

6 Answers

Jack Lalanne Power Juicer250

the power is not properly supplied to blade .....just check whether the connections are proper ....

Aug 09, 2008 | Jack Lalanne Power Juicer 250 Watts

1 Answer

The screw peg and blade of mya Jack LaLanne's Power Juicer are broken. They can replacement?

they have customer care- web search- jack lalanne juicer ,click on customer care under official site

Oct 08, 2010 | Jack Lalanne Power Juicer (Stainless...

2 Answers

Where the blade of the juicer screws on has broken off

mcdevito75, Refer to the owners manual for return of the juicer for repair, or go online to Jack Lalanne juicer for repair/return details.

Jun 16, 2010 | Jack Lalanne Power Juicer 250 Watts

2 Answers

The plastic screw, which the grater is screwed onto (looks like part of the motor) is broken.

I had the juicer for exactly two weeks and the same piece broke. The little plastic part in which the blade screws onto. Called the company and they were actually no help at all. Please don't waste your money!

Nov 14, 2009 | Jack Lalanne Power Juicer 250 Watts

1 Answer

I do not know how to clean and take it apart

I did some research here on Fixya and this is what another expert had to say.........pull the metal bar forward and down to open up into the blade compartment. your juicer should have come with a handle type key wrench thing that you stick on top of the blades into holes to unscrew blade holder, while unscrewing that hold the blade still.
Hope this helps wishes.

Oct 05, 2009 | Jack Lalanne Power Juicer 250 Watts

2 Answers

How do you take apart the jack la lannes juicer for cleanning

I had the same problem because I bought it used. After reading that I needed a key that fit in the holes I used a pair of chop sticks and it twisted right off.

Sep 15, 2009 | Jack Lalanne Power Juicer 250 Watts

3 Answers

Jack lalannepower juicer book and crescent tool

kitchen scissor points from hole to hole, works.

Aug 13, 2008 | Jack Lalanne Power Juicer 250 Watts

Not finding what you are looking for?
Jack Lalanne Power Juicer (Stainless Steel) Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jack Lalanne Juicers Experts

Cindy Wells

Level 3 Expert

6100 Answers

Roger Paull III

Level 2 Expert

318 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

32372 Answers

Are you a Jack Lalanne Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides