I want to know what Ram to add to my K7VM3 motherboard.

Hi, you can download the xp drivers here:

http://www.asrock.com/mb/download.asp?Model=K7VM3

There is no drivers for windows 7
the mainboard is too old.

Hi,
You can download the installation driver and software from manufacturer's website by clicking this link

http://www.asrock.com/mb/download.asp?Model=K7VM3

Hope this solves your problem. Thanks for using FixYa.

Asrock K7VM3 mother board with AMD Athlon 2600+ processor.
The Motherboard is having a AGP slot which says to use AGP with 4X and 1.5 V
Can someone suggest the market products available
when I contact the technical team of Asrock. they responded as below:
The AGP slot on K7VM3 is the standard AGP x8 slot , as long as the VGA card you want to buy is standard AGP VGA card , K7VM3 can support the standard AGP VGA card.
Or , you can double check your question with your VGA card vender before you buy it .

Do you hear a posting beep??? if so and you have a video card, remove reseat it and retry, also do same with ram.

If no posting beep then do as above, if still no go it suggests faulty ram / cpu / mobo.

Three beeps means that it's a RAM problem. Check if your RAM is installed correctly, adjust them if necessary, then turn the computer back on again.

it my be your ram

http://www.asrock.com/mb/download.asp?Model=K7VM3
here u can download...

I m unable 2 find the vga drivers for AMD K7VM3 for Windows XP Professional

If you are referring to the ASROCK mobo then it will work on the high density although not as good as with the low density but it will nontheless work.

Go into the BIOS and make sure the 2nd IDE channel is enabled and set to auto detect.