Ming 1200 makes startup sound,nothing on screen.it is blank.

Hi! Please try inserting a paperclip on the reset button. Press hold for atleast 15secs. and this can resolve the problem. Hope this helps and thank you for using FixYa!

Have your laptop check up the technician, it has somethingt to do with your video card

If your looking at your phone screen and it’s asking you for a security code, you may want to try the last 4 digits of your cell phone number, that is the default for most phones. If that does not work then you can try 9999 or 0000. Those are also standard with most phone companies. If after that you still have no luck, call your service provider to get help with the code otherwise you risk locking your phone out permanently which stops you from being able to receive phone calls, text messages, etc. I’m sorry your having so much trouble with this! I hope I was able to help you today!

please mension the problem

hmmm...if it's been that long, you may have a device that's been inactivated, or is considered lost or stolen. You may need to connect with them, to find out if your service or device are still valid.

just flash u r phone once then all the pass words will be reseted to default

phone is lock dont remember pass code unable to make outgoing calls

Easy step by step solution!

Hey guys had the same, Try this solution before buying a new battery/charging cable (it might not be the problem):

I did these steps after playing around with it for awhile and am at the stage where my phone turns on fully and says "Battery Charging" when plugged into the charger. It is now charging normally again... Finally! (I had the flashing moto logo too when charger plugged in) I believe this problem occurs because the battery is completely drained and is unable to turn on to charge bcuz the phone needs to be on to be charged, happened to me because i left it in a jacket pocket and forgot about it for weeks. Anyways...

1. You need a USB data cable for it, it should have come with the phone, if not than any USB data cable that fits the phone's charging slot should work (charge cable for the ps3 controller will work or maybe a cable from a digital camera with the same end)

2. Connect the phone to your computer via the USB cable and a USB port that works. Make sure it's plugged in and leave it (even if nothing happens and the screen on the phone is still blank). Although the screen is black, the phone is still charging via your computer (it's just too low on battery to produce the light on the display screen to load up your phone).

3. This might take anywhere between 15 and 45 minutes so be patient and leave it plugged in, beats buying a battery of charger with your money for something that can be solved for free.

4. At some point your computer will make the usual processing noises signalling that it is finally recognizing the phone as a usb device and shortly after your ming's screen will turn on stating that the battery is charging. Success! One of two things will happen, if you have previously installed the ming's drivers to your pc it will just recognize the phone. If you are like me and do not have the drivers installed, you may choose to do so via the cd that came with the phone or just not do it at all.

5. If you want to just charge it via the computer then congrats, your job is done, just leave it plugged in and wait until it is fully charged. If you wish to switch to your regular outlet charger please proceed to step 6.

6. At this point drivers installed or not, either safely remove device from the computer or just unplugg it. Now return your phone to your usual outlet charger making sure its connected. When plugged in you'll notice the moto logo appear (no longer flashing). After about 5 seconds that logo will disappear. At this time flip open the phone. The usual turn on sequence will play out and it will now load up with the battery charging screen similar to the screen from when it was plugged into the computer. Congratulations your phone should be back to normal now.

NOTE: This charge will take longer than your normal charging time but that's just for this time since your battery is super low it will be back to normal after that. Also if this did not work for your phone then now is the time to see if the charger/phone/battery is the problem.

So I hope this helps you out and eases your state of panic. I hope I saved you guys some money with this solution and that your mings are up and running again. I know i was pretty content when the problem was fixed. Please reply with any comments, questions or concerns you may have. Enjoy your once again working mings.

Recently i have purchased a Moto ming A1200 (second hand) i dont have the driver CD for this mobile from where will i get driver CD for this phone for connecting it to window vista basic PC

crash my A1200 mobile when i install themes for there and reset then when booting system loading crash and screen loading crash?????????????????????????????????