Dish network remote

I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at [email protected]!

Look up codes for TV here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Hey there, Cheri Torres with DISH Network Customer Service here. It sounds like you are going to need to addressing your DISH remote to your Daewoo TV. We have a few different remote codes for each of our different models of remotes. The model number of your remote will be located on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for our more popular models of remotes as well as the instructions for addressing the remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email me at [email protected].

Codes for Daewoo TVs
3.0, 3.1, 3.2, 3.4 IR remotes - 531, 719, 664, 727, 524 and 816
5.0, 5.2, 5.3, 5.4 IR remotes - 719, 531, 727, 526, 529, 530, 531, 684 and 658
4.0 and 4.4 IR/UHF remotes - 719, 727, 733, 531 and 524
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 531, 719, 727, 573, 652, 524 and 505
20.0 IR and 21.0 IR/UHF remotes - 531, 528, 832, 524 and 630

Instructions for addressing the remote to the TV.

1. Turn the Television On.
2. Press and hold the TV Mode button until all other mode buttons light up red.
   
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button once.
   Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Hey there, Cheri Torres with DISH Network Customer Service here. It sounds like you are going to need to readdress your DISH remote to your new Vizio TV. We have a few different codes for each of our different models of remotes. You will be able to locate the model number of your remote on the back of the remote at the top usually a two to three digit number with a decimal point. I will list here for you the best codes for Vizio TVs as well as the instructions for addressing the remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email directly at [email protected].

Codes for Vizio TVs
3.0, 3.1, 3.2, 3.4 IR remotes - 505, 671, 627 and 766.
5.0, 5.2, 5.3, 5.4 IR remotes - 627, 505, 506, 457, 111 and 520
4.0 and 4.4 IR/UHF remotes - 505, 627, 555 and 766
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - 627, 505, 678, 825, 520 and 766
20.0 IR and 21.0 IR/UHF remotes - 505, 598, 627 and 773

Instructions for addressing your remote to your TV.

1. Turn the Television On.
2. Press and hold the TV mode button until all other mode buttons light up red.
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button once. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

jholsinger1,

It sounds like this is TV 1 that you are having this problem with the remote, is that correct? What has changed from when the remote was working till now? Was anything moved like the TV/receiver? You may have some type of interference with the UHF signal. Without getting more specific information, I'm generalizing the trouble shooting steps. Would you clarify if it's TV 1 or TV2. Please post to this site and I will respond back to you.

Ray Calo
DISH Network

nmg55

Not all remote are compatible with all our receivers. Depending on the receiver and remote model numbers, if they are compatible you can readdress the remote to the receiver. I have provided a link for readdressing the remote to the receiver. I hope this helps.

Instructions on how to readdress the remote to the receiver:
http://www.dishnetwork.com/SupportSection/remote-setup
Remotes and receivers models:





222 -
21.0 IR / UHF Pro


222k - 21.0 IR / UHF Pro


301 -
3.4 IR


311 -
3.4 IR


322 -
4.4 IR / UHF Pro


381 -
6.4 IR / UHF Pro


411 -
20.0 IR


501 -
6.4 IR / UHF Pro


508 -
6.4 IR / UHF Pro


510 -
6.4 IR / UHF Pro


512 -
6.4 IR / UHF Pro


522 -
6.4 IR / UHF Pro


612 -
21.0 IR / UHF Pro


622 -
21.0 IR / UHF Pro


625 -
6.4 IR / UHF Pro


722 -
21.0 IR / UHF Pro


722k - 21.0 IR / UHF Pro







Ray Calo
DISH Network

I am going to go out on limb and guess you have an LCD tv. If this is the case that explains the issue my suggestion is to get a UHF PRO kit to make TV1 uhf compatible and I bet you never experience this again.Thanks for using Fix Ya.
Jim

Hello, sorry but we do not have any additional codes. Thank you, Onkyo USA

Okay I am a bit confused as to the exact problem you are having but I will give you multiple avenues to resolve thios issue.

Assuming that the issue exists with TV1's remote:

Some IR remotes experience interference with other peripherals at times. The easiest way to resolve this is to get an 8.0 remote that is IR/UHF capable.Using the front panel buttons or the old remote place the receiver into UHF Pro mode by pressing menu-6-1-6 . You should be on UHF Pro setup: move the highlight to the left and go to the enable selection, press select and move the highlight back to the right to done.exit out of all screens. Then press the menu button twice to get to the system info screen.Here we will be canging the remote address of the new 8.o remote to the number for the primary remote address. This number is near the bottom of the screen. On the 8.0 press the small SAT button in the upper left hand of the remote and hold until all light on the top light up, enter the number on the screen for the primary remote using the keypad on the 8.0, press the pound sign, the SATbutton should flashh three times, then press the record button. Now you should be able to use the new remote normally. You will need to program the remote to the TV if you were able to control volume and turn TV on and off before. Since this is a different model remote it may or may not be compatible with the TV. If you need assistance with programming the remote to the TV itself just post another request for assistance and one of Fix Ya's Expert will hook you up. You can also find the solution in the archives of previous solutions as that issue is commonly addressed in this forum.

If the issue lies with the TV2 remote I would suggest moving the antenna off the back of the receiver into the room TV 2 is located. This can be accomplished by following the following diagram. If you still need assistance please let me know. I hope this solves your issue.