At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Press src hold menu button down,press seek button up to change option to "auh" press seek button left or right till it says on. problem solved i had to figure it out myself good luck
Selecting the (SRC) button to "AUH" which is the auxiliary input.
If this does not work.
Then set the unit to standby mode. By pressing the (SRC) button until "STBY" is displayed. You need to check that "On AUH" is enabled. Now try the "AUH" again.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A decent info page for this radio and options is at Crutchfiled. They seems to provide good / very good information on all the products they sell. Service and pricing is up to you. To use Aux inputs, you need to purchase and connect the optional Aux Input Adapter (picture below).
Crutchfield sells these for about $20, and they plug into the jack on the rear of the radio. The jacks on the cables attached to the radio are preamp outputs - not inputs; and will not work as an input.
Here's a link to the manual (free download). Good luck!
Change mode to Standby and then scroll through until you find the AUX and click the right hand knob to the right to enable the Aux Mode. Then simply change mode to Aux
i was just having this same problem but i pressed standby and menu and scrolled up till i got to a AUH which is off all i did was turn it on and press standby again and my ipod started playing
Its becuase the aux is turned off as default so you have to activate it. Put the unit into standby mode Press menu for at least a second untill menu appears and then select the aux option and edit it to either aux on1 or aux on2 or aux off. Anyproblems and you can download the pdf for free from internet
The red and white RCA terminals on the back of the unit are generally outputs for amplifiers. To use AUX the unit will need to have a 3.5mm jack in the front or rear. If not than the unit does not have AUX input capabilities.
here is some thing that will help u out.
AUX Input: The KDC-MP2035 is equipped with a front panel 3.5mm minijack auxiliary input for connecting external portable audio devices such as an MP3 player or Tape walkman. The receiver allows you to select between the following AUX settings.
Off: the source button does not scroll through the AUX input when function is turned "off"
Aux 1: turns on the AUX input for use
Aux 2: turns on the AUX input in the attenuator mode - press the attenuator button to activate sound. pleas let me no if i can help any more and dont be afraidto rate me i dont bite lol just kidding
×