I have an Umbro Youths Black Strap Watch. How do i set the alarm to beep every hour?

we do not sell any products try a watch shop

Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop".
Qiu:Circle segment lights up (only a black point in the middle, NO ALARM)
Circle segment with a black section on the above middle point, ALARM ON.

press in all buttons at once hold them.should beep once or 5 times. resets everything. then re set time.www.watchrepairbattery.com

Push and hold the reset button on the bottom right of the watch and then push the mode button on the bottom left. When you push the mode button, all the days of thge week should no longer be illuminated. This is the same to turn the beep on, only you need to see the days of the week on not off.

accelerate it

Go to the Casio web site.

Select "Support"

Select "manuals"

Go back to supplier!

This is out of memory so bare with me. Push and hold the "set" button as if you were going to set the time. Now continue to push the "mode" button that moves from hours, minutes, date, beep setting, alarm setting, etc. Eventually you will come to the Golf setting which will ask whether or not you want to display it. Select yes, push the "set" button again, scroll through, and voila.

Start with watch in normal clock mode. press and hold bottom right "lap reset" - alarm time appears. Keeping "lap reset" held, I can then toggle the alarm on and off using top right "start/stop".
Qiu: Circle segment lights up (only a black point in the middle, NO ALARM)
Circle segment with a black section on the above middle point, ALARM ON.

Press and hold the top left button (mode) until the numbers start blinking. On mine this is the alarm time set. Press the mode button one more time to get to time set. The hour will be blinking. Press top right button (start/stop) to cycle through hour, minute, date, etc. and press bottom right button (adjust) to change the number which is flashing. Press mode to finish.

To turn off alarm, press and HOLD Adjust button, then press Start/Stop to cycle through alarms on/off.