I need the code for my magnavox tv using a philips universal remote
Http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This
is the user's manual for a Phillips remote control. There is a list of
codes in it. They should be rather universal. There's also instructions
as to how to program it. I believe that there is a way to program it
without using the codes.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4.
Press the Channel Up button repeatedly (up to 300 times) until the
device could be controlled changes channel. The red indicator blinks,
then stays lit. If you accidentally overshoot the code required, press
the Channel Down button to backtrack through the library until the
device changes channel. Pressing Channel Up changes direction to
forward again. Press and release the Mute button to install the code.
Hope this helps :)
how to get capation off my philips magnavox tv with remote can not make remote to go up or down . what buttons do i use help
SOURCE: code for philips mg3s universal remote
try this
http://www.urc.philips.com/find_baseCode.asp?setupDocId=511&efsetupDocId=-1&asDocId=511&readDocId=-1
If that doesn't work go here and it will work for sure!!!!
http://www.urc.philips.com/
If your bored visit http://www.stiffgames.com
SOURCE: I need code for philips universal remote to use in akai tv
Hi go to the below link to get a PDF of the Manual and Code Book with all codes included. YOU WILL FIND YOUR CODES BELOW!
MANUAL WITH CODES (PDF): http://www.replacementremotes.com/store/productdetailp.cfm?productid=61355
CODES ONLY (PDF):
http://www.replacementremotes.com/store/productdetailp.cfm?productid=36735&reset=1
SOURCE: magnavox dvd player and universal remote need code please
have rca universal emote need codes to progam magnavox dvd player please help thanks
186 views
Usually answered in minutes!
×