Every day when i log on to my computer belkin router's set up comes on the screen. I already have it. (I think the model number I put below is right)

Sir,

Check your IP Address, Maybe its conflict with other device.

My advice to turn it automatically.

Or

Installing your Belkin router is still possible even without using its Setup CD. You can set up your router manually through the web-based setup page of the router.

Perform the steps below to set up your Belkin router through the web-based setup page.

NOTE: images may vary depending on the router model or computer you are using.

Power cycling the modem and router
Step 1:
Unplug the modem and router from the power source.
Step 2:
Connect the modem to the WAN or Internet port of the router.

Step 3:
Power ON your modem first, then your router by plugging them back to the power source.
Manually setting up your router
Step 1:
Connect the computer to one (1) of the Ethernet ports of the router.




Step 2:
Launch a web browser and enter "192.168.2.1" in the address bar.



Step 3:
Click Login.



Step 4:
Leave the Password field blank and click Submit.



Step 5:
Under Internet WAN, click Connection Type.



Step 6:
Select your Connection Type, then click Next.



NOTE: If you don't know your Connection Type, contact your Internet Service Provider (ISP). To know how to set up your router according your ISP, refer to the links below:
Cable Internet Service
PPPoE / DSL
Static IP Account
Step 7:
Enter the details provided by your ISP and click Image.
You should now be able to connect to the Internet. To verify, Internet Status on the upper right corner should read Connected.




You can also launch a web browser and go to your favorite website or try visiting the Belkin Site for more information and support on your devices.

as mention On official Belkin website vedio for Belking Online Support:
Setting up the Belkin router using an iOS device Video

Belkin

Or

In case you still need assistance then follow us for Belkin Tech Support on:Belkin Support

Reset the Belkin to default settings and reconfigure SSID and Security Key(password). User manual can be found here: http://www.belkin.com/support/dl/pm00781ea-usermanual_uk.pdf

try on this page
http://en-us-support.belkin.com/app/answers/list/kw/F5D7230-4/search/1#s=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
select your exact model
and succes!

Not sure if this is exactly what you are looking for, but this is what I did when I set up my Belkin (well, before I wanted more security and went WPA)...

1. Log into your Router or Access Point.

Open your web browser and type in IP address of the Router or Access Point. (The Router default is 192.168.2.1, the 802.11g Access Point is 192.168.2.254 ). Log into your router by clicking on the "Login" button in the top right-hand corner of the screen. You will be asked to enter your password. If you never set a password, leave the password field blank and click "Submit".

Click the "Wireless" tab on the left of your screen. Select the "Encryption" or "Security" tab to get to the security settings page.

2. Select "128-bit WEP" from the drop-down menu.

3. After selecting your WEP encryption mode, you can type in your hex WEP key manually, or you can type in a passphrase in the "Passphrase" field and click "Generate" to create a WEP key from the passphrase. Click "Apply Changes" to finish. You must now set all of your clients to match these settings. A hex (hexadecimal) key is a mixture of numbers and letters from A-F and 0-9. For 128-bit WEP, you need to enter 26 hex keys.

For example:

C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key

4. Click "Apply Changes" to finish. Encryption in the Router is now set. Each of your computers on your wireless network will now need to be configured with the same security settings.

This is taken directly from the website listed below



http://www.belkin.com/support/Network_Support_Wizard/Setting_up_wireless_security.asp

Connect your computer directly to your cable or DSL modem. If you see a log-in screen for your Internet Service Provider, make a note of the user name and password.

Unplug your router and your cable or DSL modem.

Plug your modem to your Belkin router's "WAN" port. Connect your computer to one of your Belkin router's numbered ports.

Turn on in your modem and wait 10 seconds. Plug in your router and restart your computer.

Select "Start," then "Control Panel" and then "Network Connections." Right-click "Local Area Connection" to bring up your network connection properties.

Click "Internet Protocol (TCP/IP)," then "Obtain an IP Address Automatically" and then "Obtain DNS Server Addresses Automatically."

Open your web browser. If you are prompted for a user name and password, enter the information you recorded in Step 1

Hi Friend, Please try to update the firmware of the Router,corresponding to your Model and the Version Number of the Router from the below Mentioned Website
www.belkin.com/support
If you have further clarification please send a reply
Regards, Aysaam

Connect network cable from your current DSL modem to the WAN port (or internet port) on the back of the wireless router. It should detect the connection automatically.
If not, then try running the CD software that came with the device. It should setup everything correctly.

I received this solution from Belkin. It worked for me & I hope it does for you. Good luck!

Belkin solution:

Please follow the details given below:
1. Please contact your internet service provider to know the connection type details (Is it PPPOA,PPPOE, Dynamic or static)
2. Belkin router F5D8633 ADSL router works only with ADSL broadband connection and does not support Cable broadband connection.
3. Do not use the Setup CD Assistant; reset the unit and configure it manually. Make sure to set the correct VPI/VCI values in the process as the default settings may not be correct.
4. When using PPPoA, always use VcMux encapsulation, when using PPPoE, always use LLC encapsulation. Keep the VPI and VCI as 0/38.
5. Please follow the instructions given below to configure the router manually:
- Connect the phone line direct to the router, or through the filter.
- Connect the computer to one of the LAN ports on the router.
- Switch off the router and power it back after 5 seconds.
- Restore the router to factory defaults by holding down the reset button on the back of the router.
- The power light will flash and then come back ON solid, indicating that the router is being restored to factory defaults.
- The corresponding lights on the router should be lit-up.
- Check if the computer has an IP address in the range of 192.168.2.x
- Click on `start` & click `Run`.
- Type in `cmd` & click `ok`.
- Type `ipconfig` and Enter. Check for IP address, subnet mask & Default Gateway.
- If not, specify a static IP address, gateway and DNS by following the steps at http://web.belkin.com/support/kb/kb.asp?a=2824
Then follow the below instructions to reset IE.
-Open Internet Explorer
-Click on Tools -> Internet Options
-In the General tab, click on Delete Files under Temporary Internet Files
-Click on Clear History
-In the Connections tab, select Never Dial A Connection and click on LAN settings
-Uncheck all the options and click on OK
-In the Advanced tab, click on Restore Defaults
-Click on Apply and then OK.
- Open a new Internet Explorer window and on the address bar please type in http://192.168.2.1 and click on go.
- You should be able to access the routers set up page.
- By default the password is blank.
- Click on Connection Type and Reconfigure the connection on the router (using your ISP details).
- Save the Changes.
Note: Please obtain the correct values regarding the Internet connection from your Internet Service Provider.
Internet Status should show Connected on the top right hand corner of the web page.
If the problem persists, please get back to us with the following information given below:
1. Type of connection provided by the ISP (Is it PPPOA,PPPOE, Dynamic or static)
2. The ADSL light status on the router. Please let us know if the ADSL light status on the router is solid or flashing.
3. ADSL broadband connection or Cable broadband connection.
4. Operating system on the computer and the version number for the internet explorer like IE 6 or IE 7.
5. Internet Status shows as Connected or Disconnected on the top right hand corner of the router web page.
Log on to the router web interface at http://192.168.2.1
- By default, the password is blank.
- Click on Security log under "Firewall" option (let us know the message you see under the security log or send us the screen short of the message you see under the security log)
6. Then, check the IP address of the computer. For checking the IP address:
- Click on start & click `Run`.
- Type in cmd & click `ok`.
- Type IPCONFIG and Enter. Check for IP address, subnet mask & Default gateway.
- The IP address should be in the range of 192.168.2.x (x=2 to 254)
- In the command prompt type PING 192.168.2.1 & Enter. Check if you are getting replies.
- Type, PING 4.2.2.2 & press Enter. Check if you are getting replies.
- Try pinging yahoo by typing PING yahoo.com and Enter. Check if you are getting replies.

Greetings...

Here are the steps to hopefully get you reconnected...

SymptomNot able to connect to the router/AP wirelessly, or intermittent wireless connection.
ResolutionTo address this issue, follow the steps below:
Note : The steps below are applicable only for Belkin routers.

1. Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
2. You will get a login page. Leave the password blank. Click Submit .
3. On the left side of the page, click Channel and SSID below Wireless .
4. The wireless channel on the Belkin router is set to Auto by defualt. Change the wireless to a static channel. Click Apply Changes .
5. Click Logout in the top right hand corner.

Note: The wireless card in the computer will automatically detect the change in channel number on the router and will update the channel on the card.

Have a great day...

Ed