On my new camera phone (samsung a737), all of the pictures that i take show up really dark on my phone. I have tried changing the brightness, the contrast, and several other settings for the camera, but nothing seems to work.
Re: On my new camera phone (samsung a737), all of the...
On my samsung t729 the phone will not allow me to take photos. the message memory is full pops up on the screen, but the phones memory is no where near full. what can i do to correct this?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If Picture mode is set to Cinema or Custom, the screen may become dark. If the screen is still dark after the picture quality mode is changed, change the setting Backlight, Picture, Brightness and adjust the brightness to your taste. ... If Power Saving is set to Low or High, the screen becomes dark https://www.sony-mea.com/en/electronics/support/articles/00024643
While dismantling you have to be careful in handling the display chip. In all probability the supply wire to the display has cracked. There will be two supply wires to the display. Check its continuity. If there is no resistance or continuity, you will have to change the display
I have the same problem at my church with the indoor lighting on my camera. I'm able to get it work by putting the whole thing on manual and adjusting the lighting settings that way.
I had the same problem before. Did you check to make sure your exposure compensation wasn't set at a negative number? half press the shutter and rotate the large dial on the back of the camera to change the exposure to 0. If this just changes your auto focus points, you have to change your custom function 13 from a value of 2 to 0 and then try half pressing the shutter and rotating the large dial in the back again. This fixed my problem with shooting in P mode (which I only used when absolutely necessary) and I hope it helps you.
u might want to try and put a coffee filter over your flash when you take pictures to make the flash less bright. it sounds really silly but it actually works.
×