Ghosts I have blue and yellow ghosts on my set what could be wrong and how would I fix the problem?

Your convergence has failed and needs to be repaired. Once quick test is to goto your convergence menu and see if you can adjust red and blue. If not its has failed and needs to be fixed. You can call in a repair shop or you can get the parts and instructions from www.TvRepairKits.com and do the repair yourself. Its a fairly easy DIY fix.

How old is ur tv...? Cos the wear & tear is the cause for this ghost appearance. The repair for this is only temporarily. It can not be eliminated completely.

Generally the blue ad yellow colour can be removed by a tool which is available with a tv technician. It is not very expensive to do this. Hoping to hear from you.

Thankyou

Ghosting and shading on this series printers is usually caused by either a bad fuser or out of date firmware. There were fixes in firmware that stopped ghosting from happening. As for the cleaning the lens. These models have a bad habit of collecting dust on the inside of the scanner unit and the only way to resolve that is disasemble the laser unit and clean the inside of the lenses.

Replace both of your STK ICs STK392-110 use 150s
Mats has them 1-800-628-1118

This is a common problem. Its called a convergence failure. You can get all the parts from www.TvRepairKits.com

Symptoms:

• Screen Looks 3D
• Colors wont align
• Screen may look distorted

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

First of all sorry for delay.
can you provide a image of yello shadow.I believe it seems to be technically say "ghost image"
If it is ghost image we can try by entering SERVICE Menu and adjust RGB level of the light engine.

Good luck
Dals123

let me know your model number and I will be able to tell you what you need to fix the convergence on your set.

how old is the tv ??
if this tv is older than 5 years it may need to refill the liquid on the proyection bulbs and/or could have contaminats in the fluid causing the ghost and to fix that you will need a professional person to do it

convergance ic bad
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Replace FL231 400ma fuse. this will fix your problem.