Need to transfer files from 8100 to gx240 - Dell Dimension 8100 PC Desktop

HONDA GX240 HORIZNTAL SHAFT ENGINE REPAIR MANUAL

for the easy solution download the pdf file

The first thing I would do is pull the hard drive from the sick Inspiron. Now get yourself an IDE/SATA to USB adapter from a computer retailer or on Ebay, they cost about 20 bucks. Attach the HDD from the Inspiron to the adapter and attach the usb side of the cable to a good computer. The computer will now read this drive as an external and allow to access any and all files. Just make sure that before you remove the HDD from the Inspiron, you remove any passwords on the computer that might limit your access to files. Also on the good computer go to control panel > Folder Options. Click on the boxes to allow viewing of system files etc. just for a little while, during the files copy. Make a folder on your desktop and name it whatever you want. Now go through the HDD from the Inspiron and copy any and all files to that folder. When you have finished, attach your new external. Now just copy the files from the folder on the desktop to the new external drive and there you go. These adapters are the only true way to be able to pull this off. Good luck

Sharp 8100 file of manual
http://files.mail.ru/N4G1OG
Please vote for me for my answer. Senks) Код ошибки Описание 0 Stepping motor 10 Mirror motor 40 Dark box switch 8 Mirror motor C1 Charge corona C2 Transfer corona C3 Discharge corona CH Interlock or thermal fuse CH possible DV unit not installed properly H1 Heater thermal fuse H2 Thermistor H3 High Temperature H4 Low Temperature H5 Lower thermofuse H6 Lower thermistor H7 High temperature in lower roller H8 Low temperature in lower roller L1 Forward Scan L2 End of Scan L3 Return of Scan L4 PT/main motor L5 Lens L6 Charge block switch P1 Copy lamp thermal fuse U1 Low battery U2 Data transfer U3 Dark box

Hi,
Most of the mobiles will prompt the user to select the mode of connection when connected to computer such as "Mass storage mode/data transfer mode" and "PC suite/modem mode". If you select the "Mass storage mode/data transfer mode", then only your mobile phone's memory card is connected to your system just like pen drive. so only the pictures present in momory card can be accessed. For transfering pictures from phone memory, try the following methods,
1. Go to your file manager in mobile phone, move the pictures from your phone memory to memory card.
2. Install proper PC suite for your mobile, connect to system in phone mode/modem mode/pc suite mode. Then using the PC suite file manager in your system, oyu can access files stored on to phone memory as well as memory card.
3. Connect a bluetooth dongle to your system, establish a bluetooth connection to your mobile. Threw bluetooth file manager from your system, you can browse the phone memory of your phone.
I hope any of the above tips may solve your problem.

THIS WILL MAKE YOU LOOSE ALL FILES!!!
(even password)
Take the memorycard out of the phone and,
put it in a computer.Use filesystem FAT-32
to reformat your memorycard.
Now the card will work again!
No password, No files will be left after a
complete reformat
This is your solution! Please vote!

Use an USB pen-drive or even a floppy disk because the drivers can fit in 1 MB.

The file on the hard drive is corrupt, run scandisk and fix the file error, but the video is likely a loss

I use to get that messege because my phone didnt have enought memory for the transfer. I bought the memory card so now it's fine.

You might need to install
Windows 98 USB Mass Storage Device Drivers

it wont unfortunatly